- Ideal humidity and buzzing
- MIJ Jazz - Do you have to take the neck off to adjust the truss rod?
- I feel really dumb asking this question
- My Corvette is killing me
- Anybody tried the Neuser single bridge with fretless switch?
- De-Fretting my Bass
- Replacement neck for MIA Fender Jazz
- Replacement Part & Touchup Paint
- How to maintain my warwick thumb
- Can anyone ID this bridge?
- buzzzzzzzzzz
- Insane Fret Buzz
- Music Man Maintenance Questions
- Detuning fret noise
- what shall i do to a back bow neck
- E,A,D,G sounds good, but the B is not so good.
- Anyone have Gotoh Res-o-lites?
- switching fingerboard to fretless?
- Problem - Noisy Ibanez
- rattling
- Help With Warwick Finish Repair
- Naimish bridge
- Out of tune?
- Digging bass body..
- Major Rattle in the Bridge -- HELP
- noisy badass II
- Timespan between changing strings/setting intonation?
- Setup for tuning down a half step
- How to remove knobs?(replace)
- Constant tweaking do to weather changes?
- The Buzz Feiten Tuning System
- Mismatched Tuner/Bushings (Old vs. New Fender)
- Stingray Replacement Bridge
- Changing Strings-Do I need to do any adjusting?
- Basic Questions
- Big fat strings. Can my bass handle it?
- 3 strings on a narrow 5?
- spongy loosing sound
- Short scale strung BEAD ?
- one fret buzzes
- ATTN FENDER JAZZ USERS
- Help! Fender Japan Jazz with bad neck: Heat Treatment?
- thin sounding D and G string
- problem re: fretless fender jazz
- Defretted P-Bass
- hum in bass
- sanding my bass?
- I've got a bit of a problem with my warwick
- String Buzz Behind Fretted Note?!?
- Truss rod odd behavior
- Kahler's BACK!!!
- what would you do? SUB Bass nut
- Guitar help.
- need help w/ my ibanez sr900
- BadAss II Bridge Installation?
- Cost of defretting?
- Problem with my bridge...
- Hipshot Ultra Lites
- To sensitive "tunerscrews"
- Method for Jazz Tone!
- Detuning all strings 1/2 step and issues related
- constantly lower frets
- Baritone Bass
- Bridge Installation
- De-tuning, is it safe?
- Issues for tuning up a full step (Fender Jazz)
- Truss Rod help.
- help with bridge replacement
- shims: what are the drawbacks?
- ABM headless hardware info?
- Please help to identify a weire piece of truss rod
- tone question
- Set-up standards???
- PBC/Bunker Basses - anyone ever done maintenance on the rod in the neck?
- "radiused" brigdes
- Fret Wear??
- Treatments for fretless ebony fingerboard?
- Takemine Acoustic Bass (Noisey Jack)
- MM routing template
- Strange fret "rattle" problem
- Neck adjustment needed?
- Fret buzz confusion
- How do I remove the nut?!
- Long frets
- Bridge question!!! **HELP**
- Surface scratch removal?
- Atlansia strikes again
- Installing new strings trouble, low tension
- Playing over the bridge pickup
- Nice Tobias Basic six..but.....
- Today's Project PICS Included
- Lowering the Action
- Fender P Bass Fret Buzz
- Adjustable Nut Question...
- Geddy Lee bass Saddle Problem
- Scale length--what is this?
- Six string bass neck adjustment?
- So,does ebony need conditioning?
- How the hell can I fix this?
- 5 string flea bass question
- Stripped tuning machine?
- Loose neck/bending neck? Help? Please...
- Neck/body alignment query...
- Where in Wisconsin to take your bass for a setup?
- J-Bass Neck Vs. P-Bass Neck?
- Putting a finish on "Ebonol"
- Short scale, different setup?
- recommend shop to send bass for setup/minor repairs
- buzz-am i going crazy?
- Ugly neck grain question
- set up fiasco
- weird bass humm thing
- dead "e" bright "adg"
- Preventing chrome weathering / oxidizing / yuckiness
- Have you ever waxed a fretboard!?!?!?
- How common are dead spots in the second octave?
- Getting Scratches Out of a Sterling's Finish?
- Kaos mod
- The DIYers toolbox...what do I need?
- nut file widths
- Keeping Your Neck Clean and Fast!
- A string buzzing... im going krazy
- Fret-buzz? Something else?
- DIY: Installing your own nuts & bridges?
- Leo Quann badass bridge parts
- setup on a Guild B30
- 5 string, strung high or low?
- Neck Tilt? Setup Woes.
- Yamaha Patitucci model - 2 truss rods?
- Steinberger neck
- Yamaha John Patitucci model, how to adjust 2 truss rods?
- i need help with my gibson t-bird
- Action adjustment or warped neck
- Trussrod\action problems with my ibanez....
- eden 210 'quiet notes'
- Hipshot Bridges E --> Drop D??
- Bridges
- High C vs. Low B
- Should my setup reflect tuning down 1/2 step?
- Roundwounds = Fretnoise?
- Removing Neck Lacquer
- tuning machines for a mim/warmoth
- Has anyone setup their Warwick 5-string with eadgc tuning?
- Low action & loose strings
- Buzzing behind nut on E
- Fender bridge vs Gotoh 201
- Buzzing Problems
- Overhauling a bass: Fun and functional
- Replacing the truss rod?
- have any of u ever done this before?
- Jazz pickup posts sticking way up...
- Low-E Sucks!
- What exactly should I shield?
- Problems with new 5-string
- Bass Bridges...
- Spalt Maple fretboard question
- Need New Machine Head for SR5!
- how to mount a bridge
- Stringless Bass Warps Neck - Urban Myth??
- Buzz between the nut and my finger
- action
- Badass Bass V
- Where is my buzz coming from?
- My first soldering job! (pics included)
- What diameter hex key do I need for a Baddass II?
- String buzz between 12th and 22th fret...
- chrome pitting
- BEAD Tuning on a MIM 4 stringer?
- Killing my buzz
- Modulus jazz tuners?
- I want to refinish my frets, where do I start?
- my teacher at school told me my bass needed intonation
- High C
- Lower Action = More Growl
- new frets
- Help with bad ass 2 bridge
- parts
- Flat Black Refinish
- Low B on 4 String?
- Unstable E string
- Static from jack...
- Loose truss rod nut
- Bridges - Switching from Top Load to String Through
- Recommend shop to send bass for setup/minor repairs in Houston
- raising strings
- gold j bridge
- Fret a fretless neck
- Neck help
- Don't do mods to improve technique!
- Major action problem
- Fret buzz and nut carving.
- MTD Kingston Neck Issue
- New/Re-Chrome Plating on my My Bridge
- String through, tuner extensions, pc board spacers, etc.
- Dead notes on my MIM jazz..HELP!
- string buzzing, NOT fretbuzz, but MISTERYbuzz
- Info Requested on PLEK / Peekamoose in NYC
- Direct Bolt-On Replacement Bridge For Fender MIJ?
- Tuners on AM P bass...question.
- Philadelphia area techs?
- How much difference does a wenge fingerboard make?
- strap pin hole too big
- Duh! I'm an idiot!
- Bart 3 coil ?'s
- dead sounding string
- flabby b syndrome question
- Bridge/intonation problem
- Nut Question
- Strap peg problem
- Annoying trend in Bass Bridge design.
- Altered Tuning on 5 string (HELP!!!)
- having major problems correctly intonating
- Badass Dimensions?
- Problems
- GrooveTubes Fat Finger ?(Improved Tone)?
- Coating a fretless with epoxy?
- A lot of fret rattle on the 2nd string!!
- New neck...
- I stepped up But Im not sure if I need a new bridge.
- Damage to my bass [HELP!]
- help
- stripped saddle screw
- action problem that i just dont understand...
- Acoustic fret buzz!
- tuning a 6 string e to e
- Gotoh Res-o-lites?
- Oh no! My nut fell off!
- Shield your bass
- Hummmm IN MY BASS: Question
- Truss rod won't move...
- Badass II Bridge or Something Else?
- My Nitrocelulose neck feels sticky, can I sand it?
- Wow, dead E string problem fixed
- J and P necks. Are they the same?
- Geddy Lee Jazz Neck
- changing strings - quick question
- stingray 4 owners
- Neuser System
- Well, i changed strings . . .
- I have no harmonics
- Low B issue on Carvin LB75P
- Not for use with maple fretboards?!
- general questions...i think
- hardware
- Essex replacement truss rod nut?
- Anyone know how to lower the action on a warwick?
- Does lowering the action change the value of the guitar?
- evey strip a little screw?
- chrome jazz pickup cover install question
- Fender mustang