- Buzzing Bridge
- J-bass nut question
- Changing intonation problem
- Clear Satin Matte Finish
- Built a P-Bass, but the saddle-to-nut distance is off. Suggestions?
- Badass III into MIA P-Bass Plus?
- Hipshot's Ric Replacement Bridge, on a JB ?!
- Fender peg hole redrill
- Fixing dead spot by Epoxy?
- Lowering Action
- Advice needed - offering defretting service
- Just got a Peavey T-20 and need advise on neck refinishing
- Using glycerin to cure loose screw holes
- Hex Wrench for Modulus Quantum 6
- High Gloss Finish
- Fender bass tuners
- pimp my bass
- Peavey Milestone remake - please suggest
- Wooden Bridges
- Epiphone Thunderbird IV replacement tailpiece
- New Bridge for yamaha bb414?
- Intonation Question, not sure if this is ok
- Bridge mass
- string through addition
- T-40 Truss Rod Tool?
- getting wet
- D-Tuner for Yamaha
- Routing out a bass?
- Getting marker off of finish?
- '66 Mustang Bass Restoration ...Help Needed!
- Replacing the bridge on an Aerodyne
- Weather killing my bass
- Replacing a bridge on an Ibanez
- Set-ups in St. Louis?
- 70 Pbass+69 tuners+cij neck=match made in??
- how to rewire....
- I effing hate the the 7th,8th, and 9th frets =(
- Dent in wood!
- If I change my strings, do I need to raise my action?
- Cleaning graphite necks
- 2 setup questions
- My bass is buzzing at low notes.
- Cutting my own nut.
- Waiting for the neck to settle, after truss adjustment
- Just sanded down my fretless how to remove dust from fretboard?
- Truss Rod Maxxed Out
- E and B string are "warbly", less defined
- Wood care products
- weirdo guitar finish problem
- ABG set-up: saddle / nut / action questions
- This is really urgent!
- Epiphone Parts??
- Supplies for Defretting?
- Hey,erm, ugh, help?
- Pedulla thru-body bridge alteration?
- Are my bridge and my tuning keys stainless steel?
- LED'S
- Defretting a fretted bass.
- hipshot and badass
- Ibanez BTB400 problems
- Foam mute
- Maple fingerboard cleaning
- Intonation above the 12th fret
- Is there a company that makes custom tuners?
- Setting Pickup Height on Spector Euro LX
- Block inlays for P-Bass
- Modulus Fret Buzz
- Good Setup/Tech Guys In Toronto Area?
- HELP! BUZZ!
- Sighting on this Jazz neck
- New bridge for my TRB1006
- Repairing strap buttons
- Badass bridges on MM basses
- Hipshot D-Tuner & a P-Bass Lyte Deluxe
- Quick P bass truss rod question
- Set-up tech in Charlotte, NC
- Fender direct replacement bridges from Hipshot!
- Need advice on a new bass tuning
- Which way to turn Truss Rod?
- Changing Sadowsky Tokyo V string spacing
- Tung oil to Poly?
- anyone had their bass set up by one of those PLEK thingies?
- Truss Rod Adjustment Tools
- painting your bass.
- Just weird but i have to ask
- Strap peg coming loose.
- Changing strings on your bass.. Accurate, detailed instructions ?..
- good vibrations, no
- Tucson, Arizona TB'ers--- Set up Guys
- Please help with Buzz / Hum from wiring
- ideal action for slap bass?
- Part Needed 1969 Gibson EBO Saddle Set 2 point
- Fodera Owners, Truss rod advice needed!
- Bridge Dilema
- Detuner for a left handed bass
- Getting a new bridge: will it fit my SX?
- strap button on 62 jazz RI
- How to clean a maple fretboard?
- Bridge/Intonation Spector NS2005
- bridge help
- adjusting the "neck-bolt"?!
- MIM Jazz nut - flat or curved bottom?
- Buying a New Bridge w/ Whammy Bar. HELP!
- Lakland 5501 -Reborn!
- Yamaha tuners?
- intonation weirdness??
- Jay Turser Beatle Bass bridge
- refinishing a warwick..
- Fretless bass neck relief?
- recomend a tech in central oklahoma
- Setup for constant tuning changes....
- Scratchplate genius?
- Recommend setup in Pittsburgh
- sterling buzzing behind fretted note
- Batteries?
- a couple of questions
- String Mute
- Photo-flame: What's it made of?
- Polycarbonate Fretboard Clearcoat
- Too much buzz on a Pentabuzz....
- Low mass Fender bridges?
- Do BAII bridges have a special allen wrench for action adjustment?
- Wood Protection?
- Intonation ??????
- hipshot tremolo bridge
- Removing a Poly Urethane Finish
- Steinberger fine tuner loose.
- Removing a Warwick satin finish?
- New Pickguards
- Warwick Bass.....Truss Rod too tight..Unrepairable?!?!?
- Blacking out hardware?
- bass action
- Rattling
- 1-11/16 nut
- Installing P-Bass bridge cover
- frets 9-20 buzz?
- My little fret dressing adventure
- How to Re-string a normal bass into a piccolo bass.
- Changing from a lowB to a highC...
- Basic Bridge help?
- Busted a my nut!
- My nut collapsed?
- My Strat is messed up!
- How to Measure "fatness" of the neck?
- Fender CS 64 NOS Jazz neck - relief issues
- Need info on Fret rattle, maybe?
- buzzing fret on a headless bass
- SX Body and MIJ Neck
- Badass Bridge not so Badass
- Hipshot B vs. Vintage bridges
- Warwick Warped Neck
- How to buy & mount thumb rest for Fender Jazz bass?
- Carvin Hipshot 5 B Style Bridge is it Brass?
- bridge grooves
- Intonation Agitation!
- Replacing Bridge on Wasburn T24
- kahler bass tremolo - flashy non-sense or useful tool?
- Grounding Hipshot triple lock down individual bridges
- Help me fix my neck dive, please!
- Any adverse effects from carving a headstock?
- Pickguard compatibility?
- 2006 MIM Jazz 4 String Pickguard Replacement Question
- 70's Bridge Location.
- Dead Spots
- Electronic buzz.
- EMG pickup distortion
- Before I start sawing fret slots
- Floating pickup on Stingray
- Unwanted harmonics
- Battery on the Ibanez SRX700
- Need help/suggestions on frets
- Can you help with a high fret please
- Bridge for Sting/51 reissue P-Bass
- Where to get Fender Elite Bridge
- Hipshot D-tuner users
- What to use to oil Rosewood Fretboard?
- Question on Fender HSC Repair
- Bass Assembly for Beginners
- Neck Finish for Cirrus
- Dead Area On Fretless Jazz Bass
- Any good bass repair guys in the Fort Meade MD area?
- It seems I need a neck adjustment every month or 2...
- frets sticking out
- Buzz at 7th-11th frets, tighten truss rod?
- String height
- Should I alter my stock Fender?
- How much does it cost...
- Help... I keep breaking my E string
- Storing a bass
- best bridge options for 4 string
- Setup and Repair in NY/CT
- Installing P-bass pickup/bridge covers
- Hairline crack on Bass Headstock?
- Will a new fretboard help correct a dead spot?
- an annoying thing, what causes this?
- Too hot or too cold?
- What store / section of store to buy shims?
- Low mass bridge replacement for MIM Jazz
- G&L bridge
- Dead spot?
- streamer refurb ...help needed!
- Exceedingly Frustrated With My Setup
- Super noisy Essex
- Tone and action
- can you test a pickup?
- Lemon Oil...Bad?
- Modulus neck
- Buzz, but not alot.
- How to slick the neck or make it faster
- Open string output
- Does this action look ridiculously high?
- After-market Fender bodies/necks
- E string too hot
- how to remove piece of wood that's been glued to body?
- ABG bridge pin problem
- Fret Leveling Advice
- fourth saturday of the month= maintenence day
- Repairing "dings"
- hmm i think my neck is slightly warped
- Pickup Cover
- Bass refinishing in Cleveland, OH
- Problem: Strap Locks on a Hollowbody?
- Finish on Ibanez BTB556
- Anyone else prefer higher action?
- buzz when left hand releases a note
- Filling poorly-spaced nut slots
- Exact replacement tuners (I did search)
- Direct Replacement Bridge
- Replacement bridge for MTD Kingston WITHOUT new holes?
- Dropped bass - what to check after?
- modulus owners.. where to go for re-dressing..
- fretless neck refinish in Minnesota
- Looking for what to do next .... any suggestions?
- strap button on an acoustic
- Rattling E string
- Modulus Replacement Parts
- worn screwholes
- Fender jazz tuner screw missing....
- Fender '51/Sting/Dirnt neck
- Dual jack plate needed - any ideas?
- Cleaning fret rust
- high action fix
- Body help please!
- Hipshot Vintage Bridge Review
- Replacement bridge for 60's jazz bass
- Recommend Guitar Repair in Austin, TX
- How Do I Raise the Bridge--Epiphone Les Paul.
- A new member with a probably old question.
- Could I be Stripping the Oil on my Neck?
- Replacement knobs on 78 Musicmaster