- Fret work?
- Jazz Bass Volume knobs question..
- Question on cutting pickguard material.
- 35" graphite repl neck ? NO moses
- C string problem!
- What Hz should I tune my bass to?
- Nut slots distances?
- Wide P bass replacement necks.
- High Action?
- Boring Dull Sound
- Open Pore Natural (OPN) care
- First time Bass Neck Defret
- defret finishing - slot filling?
- buzzing sound
- Neck Sanding?
- truss rod nut
- Defreting Ibanez AGB140 ?
- Help needed: Intonality
- Hofner Contemporary- Cracked Pearloid Tuner
- Roscoe Beck V bridge replacement options?
- Double "Harmonics" or something...
- Vintage TEISCO/Univox/Silvertone etc. Machines..
- rargh straplocks
- Problems intonating my bass
- A really dumb bridge question
- replacing nut
- bent fret??
- Pickups fell in
- Help, My Neck Moves From Side to Side!
- Putting BEAD on my Geddy sig
- Truss rod wrench
- Weird problem, notes choking above 17th fret.
- fretboard cleaner
- Strange buzz on Fender Jazz Fretboard
- SX fretless neck
- Badass II Bridge on a Stingray
- Tung Oil = Heaven
- recessed straplock fell out
- SF repair shops
- Fret Buzz only on frets 6-10
- have you ever heard of this
- Lower frets on the b and e string?
- Is this Gap anything to worry about?
- Open A/Open D tuning (alternate tuning content)
- How to Fix Rough Spot on Back of Satin Neck
- sqiere vintage modified 70's jazz bass problem
- Dumb intonation question
- Badass bridge hex key
- Epi Thunderbird to a Fenderbird
- Heat is very not good for basses
- D-tuner question?
- Attaching pickgaurd w/out screws?
- scratches on fender sunburst
- Leo Quan Bad Ass Bridge Not Being Made Anymore?
- parts for bridges
- Cleaning Products
- What size truss rod for mexi fender squier jazz bass?
- Hofner-Type Tuners
- Removing paint
- Playing bass in a humid atmosphere
- Tuner for doing intonation
- drilling clean preamp switch holes through a poly finish - suggestions?
- Strange Buzz!
- Can Someone Reccomend a Bass Tech in NYC
- Cleaning Polish Cloth
- How hot is too hot?
- Thunderbird Bass Help!!!
- Hipshot Supertone Question
- BEAD instead of EADG?
- Will this hurt the finish?
- Intonation question
- FretFX LED's..good or bad?
- Tuning and intonation with Dtuner
- lots(really) of fret buzz
- String buzzing.
- Squier VM Fretless Buzz after 10th fret
- Bad Ass III Bridge...Doesn't fit my MIA Jazz?
- Truss rod loose whenever strings are off?
- neck wear problem
- Advice on respraying a EDB600 Ergodyne
- Help! Cracked body on Musicman S.U.B.
- READ ME: Pickup, preamp and bass wiring questions go in the Pickups forum!
- I think I have a broken truss rod ...
- Gotoh Fender replacement bridge
- warmoth vs. mighty mite
- Help!! neck slipping on a Stingray 4!!
- Bad Ass bridge low action?
- thank you TalkBass!
- new bridge?
- Please help specify HS Ultralight tuners for Fender Aerodyne Jazz Bass (CIJ)
- Fret wire / dressing preference?
- Upping the String Gauge?
- open G string buzz
- Drilling neck pocket
- Replacing a bridge (Rockbass Corvette)
- easy question for 62 ri owners...
- MIM Fender Jazz Nut
- Slight problem with bass
- I fixed the Low B on my 2008 Fender P5!!!
- Looking for Hipshot Ultralites (licensed)
- Badass bridges on Precision basses?
- Setup Help - Fender Jazz 60s Re-Issue
- String action on Brice 8-string
- Fret buzz between 2nd -4th frets
- Truss rod bolt? stripped rod?
- HELP! My D string won't intonate correctly...
- weak d string
- Bridge pins on an acoustic bass.
- Questions about pro set ups and fret-leveling.
- Rebuilding a p-bass
- Bridge saddle height screw stuck
- What's the cause of this?
- HWY 1 Jazz Neck
- action changing later after truss adjustment?
- 1st fret buzz on A string only
- Jazz neck on a p body
- 1965 Mosrite Celebrity
- Bridge Shim? How to Lower a Bridge?
- Neck Plate ?
- Installing new neck
- SX (Essex) Body With Warmoth Neck?
- clacking string noise
- bad idea? (de-fretting related)
- Will this cause any damage to my bass?
- fretless nut height question
- Starting my first defret... Have some questions.
- is this electric bass worth salvaging?
- Neck replacement for Fender P Bass
- Set up for tapping
- One piece bridge saddle intonation?
- Ebony fretless fingerboard maintenance
- Should I be worried?
- Godin SD - truss rod nut chewed and frozen
- Where can I get a neck for this?
- Sperzel? No thanks
- P-Bass setup (pup screws)
- Hennessey Straplocks
- SX SJB-62 4+1 5 String Bass?
- set up for epiphone viola
- Vintage Refret Dilemma
- I HATE INTONATION!!! please help
- Replacing frets with jumbos
- Spare Geddy Lee Pickguards?
- Grovers
- 78 Gibson Ripper - Replacing tuners????
- Fretless Bass Buzzes on One Spot
- should tunning really be a bitch?
- Questions about brass bridges and othe Ibanez goodness
- SX SPJ62
- dent in neck
- Lowering the nut on a Squier VM Fretless
- Re-fret or New Neck?
- Problem with my setup?
- Wrong neck bow?
- A Neck Reborn. Long (56k Beware)
- Epi EB3 loose tuner bushings
- Replacing side dot markers???
- Westone Headless bridge
- SX (Essex) Replacement Parts
- Extreme neck warp!
- New (to me) Warwick
- ajusting the rod
- Neck and new J bass body??????
- Replacing original strap holders with dunlop straplocks.
- is tuning down a 1/2 step bad for my neck?
- Saddle Height Screws - constantly loosening?
- Oxidized Hardware Cleaning
- Can someone tell me if this is a problem?
- how to reverse hipshot tuner
- Suspect intonation problem
- Material to protect fretless fretboard
- HOW TO ENLARGE NECK POCKET?
- Pre-slotted BadAss II on P bass
- Fender "White" pearloid isn't quite white?
- Cannot lower action on my Warwick Corvette
- potentially stripped allen nut on trussrod- what to do??
- Fender Headstock pull
- has anyone put the new Badass 3 on a Fender Jazz?
- The REAL Truss Rod Thread
- Bongo trussrod too easy to adjust?
- A string jumping out of the nut
- truss rod nut stripped?!! HELP!!!
- problem tuning E & G strings
- How much initial setup does a Warmoth bass require?
- Replaced 57 RI P Bass pickguard - do I need pickguard shield?
- Swapping out Neck on Fender P Bass
- What causes unequal string volume?
- Hofner Violin - Needs Urgent Repair
- Where to find acoustic bass brass bridge pins and brass bridge saddle?
- Traditional P bass Nut
- Switching from BEADG to EADGC
- Fender Jazz pick guard replacement
- Old MIM neck on different MIM body, will it work?
- NEED HELP FOR MY ACTION
- Fretless help
- What should I do to my J Bass's neck?
- Fret dressing?
- YASQ...
- Fender headstock decals
- Upgrading an Epiphone Thunderbird?
- Hudson Valley Luthier?
- Geddy Neck Buzz Question
- Geddy Truss Rod
- allen key size for stingray5 control knobs?
- Badass bridge slotted or Hipshot . Spacement question!
- Bass setup and Repair referral?
- Where to buy (string) nut?
- Pimping a samick
- re-stringing my Hipshot Xtender key
- did this guy do any damage to my bass?
- new to bass.. need help with set up
- Filing your nuts
- String height: B-string higher than the rest?
- vibrating string
- Bass Repair
- I need a guitar tech
- Polishing nitrate pickguards?
- Battery Compartment Screw Shredded-Help Please!
- neck dead spot
- my new project
- Crappy Squier VM tele nut - suggestions?
- Help with piccolo bass
- E string sounds out of tune (chorus-y effect)
- Fret Buzz at 5 and lower (9 & 13 as well)
- Neck finish in a spray can?
- AHH Warwick Corvette Snapped!!
- warmoth necks..are they chunky??
- Fretboard Radius Advice ????
- Is a professional set up worth the money?
- 4-string bass /// BEAD tuned
- Well, I messed up my trussrod!
- Some questions about bridges.
- Crack in horn of Warwick Thumb...
- hard to tighten truss rod
- Fret Buzz
- MIM Jazz neck, walnut plug removal
- NEED INFORMATION ABOUT TILT DISCS AND REPLACING A NECK
- Setting up action on a squire jazz bass
- installed a gotoh 201 bridge on my vintage modified 70's jazz tonight
- Bridge saddles buzzing?
- Unusual source of buzz ...
- Repair person in SF Bay area/Silicon Valley?
- Anti-neck dive device?
- Need Help With A 1979 Ibanez Musician Bass
- Pro Bass Setup ~ Oregon?
- Intonation question / Bridge relocation
- Weak E string on MIM Jazz standard?
- Going crazy
- Neck swap help
- Help with SX replacement neck