This is a search-engine-friendly text mirror of the TalkBass Forums

VIEW FULL LIVE VERSION : FS/FT: SR506 w/EMG's -$450 shipped


need4mospd
12-07-2006, 11:40 AM
(PRICE LOWERED!)
This is the older version (I think it's a 96/97 or so) that came with Ibanez pickups and preamp, not the newer bubinga/wenge SR506 with Barts.

You can see one here...
http://www.ibanezregister.com/Gallery/basses/sr/gal-sr506.htm

I have upgraded the original electronics with an EMG 40P in the neck, EMG 40J in the bridge, and EMG BQS preamp. The EMG's REALLY brought this bass to life. This thing seriously cuts through with the P pickup. The J pickup is much smoother and will blend in the mix pretty well. Blend them to get your tone in between. The action is set medium-low with no buzzing. The neck is incredibly stable and straight, the tuners hold the tune even through aggressive playing. I did have to drill an extra hole for the EMG preamp because it had 5 knobs, the bass only had 4 originally. Knobs are EMG's.

Condition, A few cosmetic nicks and scratches here and there, but nothing affecting playability. Biggest scratch is a 1/2" chip that was filled in with epoxy by the original owner. Since the bass is a natural finish, this isn't a big eye sore, but you can see it. I'll post pics later. Output jack is finicky.

I'm looking to get $450 shipped in the US. For that price you'll get an Ibanez hardcase(not in good condition) as well. It needs a new output jack, but that is a cheap easy fix.

This is a really solid bass for the money, but I've found I'm more of a 5 string guy. I'll send sound clips to those that are interested. I'll post pics later if there is any interest as well.

Trade for power amp. Around 1000 watts @ 4 ohms bridged. May consider preamps as well. No basses.

Embryodead
12-07-2006, 03:13 PM
PM Sent.

benthughes
12-07-2006, 03:19 PM
PM at you

Triclops
12-07-2006, 03:19 PM
Maple body,and black headstock 506?

Embryodead
12-07-2006, 03:21 PM
i believe so, he said he thinks it's the 97 model.

need4mospd
12-07-2006, 03:53 PM
Maple body,and black headstock 506?

Yep. It's a beautiful gloss finish too! I like it a tad more than the new model SR5xx finish. Here's a pic below I forgot I had. Only difference is the extra knob I installed.

PM's replied, and discussing trade with Embryodead.

Embryodead
12-07-2006, 06:21 PM
mm is it possible to see the damage? ill get pictures of my stuff up for you tonight.

need4mospd
12-07-2006, 07:58 PM
couple pics! You can't really see that chip from the front view.

need4mospd
12-07-2006, 08:06 PM
more pics!

need4mospd
12-07-2006, 09:19 PM
Holding for Embryo....

He's trying to decide whether he wants to trade his low mileage Porshce for a high mileage Honda with performance parts. :D

JahNissi
12-07-2006, 10:40 PM
I think I have that same shirt.

Embryodead
12-08-2006, 05:03 PM
I think im going to have to pass on this need4, thank you for holding onto it while i mulled it over.

Free Bump for a beautiful bass ask him for the other picture it really is in lovely condition.

need4mospd
12-09-2006, 06:40 PM
Alright, no prob Embryo.

I dropped the bass off to get checked by my tech on Friday. Make an offer!

need4mospd
12-18-2006, 02:25 PM
Price lowered to $450 shipped!

Considered trades (fives only)...

Lakland 55-01 (would throw in extra cash)
G&L
Fender Jazz, not interested in MIM
MTD Kingston Heir

BigDawg
12-19-2006, 03:14 PM
Hmmm, mulling over the idea of stepping back up to six string.

need4mospd
12-19-2006, 03:31 PM
Hmmm, I'm mulling over a 5 string. Coincidence? I think not! :hyper:

I do have a good trade offer that I'm considering right now, nothing final yet. I'm about to be gone for the holidays, so make offers while I'm gone and I'll take the best one when I get back. :D

BigDawg
12-19-2006, 03:39 PM
Offer sent.

need4mospd
01-08-2007, 03:31 PM
Alright, my plans have changed a little, and so did the bass unfortunatly. I was playing around with it last night and the output jack was acting fussy. Probably needs a new jack.

Trade for a poweramp of similar value! Around 1000 watts bridged to 4 ohms.