Tascam 202 MkIII rack mount pro dual cassette recorder. Nice unit but have no further use for. Only used a few times. Has a few scuffs.
Specs:
Dolby B and C with HX Pro Headroom Extension
Both Cassette Wells Record Capable for Simultaneous Masters
Record Mute Function for Setting Song Spacing
"Intro Check" Plays Beginning of Each Song
3-U Rack Mountable Dual Bi-Directional Cassette Deck
Normal (1x) and High (2x) Speed Dubbing Capability
Unbalanced RCA Analog I/O
Front Panel Microphone Input
Headphone Output
Electronic Tape Counter

Asking $150 obo
____________________________________

Samson E62 1/3 Octave Dual 31 band rack mount EQ. XLR and 1/4" balanced in and outs. In great shape. Asking $100 obo
____________________________________

Yamaha Dl-10M II distortion pedal. Used but is in decent shape. Have never seen another one. Level, Distortion, and Tone controls. Asking $30 obo
____________________________________

DoD 1642 Rack Mixer. Has a home made power supply but everything works. Has some tape residue at bottom edge. Never had any noise from the sliders/pots. Specs:
Number of Channels: 16
Configuration: 16x2x2
Inputs: Balanced mic XLR jacks on channels 1 through 8 and balanced 1/4" line-in jacks on channel 1 through 16. 20-1/4" Insert jacks for each channel, 2 for Subs and 2 for Left and Right Masters. 4 sets of 2 1/4" unbalanced jacks for Left and Right Auxiliary Returns.
Outpus: Sub 1, Sub 2, Left and Right Master using Balanced 1/4" TRS jacks. 6 Auxiliary Outs using 1/4" unbalanced jacks. Headphone Out 1/4" stereo jack and 1 BNC jack for 12 vold lamp.
Bandwidth: 10Hz to 50kHz +/- 1dB +0/-1dB
THD + Noise: Less than 0.02% 20Hz to 20kHz Output Noise: -90dBu All faders down, Master at nominal.
Max voltage gain: 85dB typical
Fader reserve gain: 12dB
Crosstalk: Better than -60dB at 1kHz for adjacent channels.
Equalization: 15dB cut/boot High and Low. 12dB cut/boost Mids.
LED Indicators: Mic/Line EQ overload for each channel; 10-segment LED meters for Left and Right Masters; Solo Active LED; yellow phantom power indicator.
Controls for each channel: Input trim, Hi EQ, Mid EQ, Loq EQ, Aux 1 through 4, 3-5, 4-6 switch, Pan, Mute, Solo, Subs and Main switches and 60mm Fader.
Controls for Master: Aux 1 through 6 Levels, Aux 1 through 4 Balanced/Pan, 4 Aux Return Solo Switches, 2 Subs Levels and 2 Subs Panpots, 2 Subs Mute switches, 2 Subs Solo switches, 2 Subs to Main Swicthes, Phantom power switch, Main/Subs metering switch, PFL, Solo switch, Headphone Level and Right and Left Master faders.
Size: 14"H x 19"W x 4"D

Asking $100 obo
_______________________________________

Soundtech PA cab. 1x10 with horn. 100 watts RMS. 8 ohms. 50hz-20Khz. Works and is in OK shape.
Asking $30 obo
_______________________________________

Peavey 115Ti wedge monitor. Full range. 100 watts RMS. 8 ohms. 75hz-17Khz. 1x15. Looks rough but works fine. More info here: Spec Sheet (http://www.peavey.com/media/pdf/manuals/80301940.pdf)
Asking $50 obo
_______________________________________

Prices above DO NOT include shipping and insurance. You will only pay actual cost of shipping. Will supply pics of anything. Just don't have any at the moment.