Hey all

well I enjoy'ed the first so much that i thought id try my hand at a second so here's a few in progress pic's of my 2nd build a 4 string headless neck thru Singlecut

spec's are

Single piece maple thru neck
Ash body wings
Bookmatched Ambrosia maple top
Walnut accent veneer
24 fret birdseye maple fingerboard
Status hardware(black)

Undecided on pup's and pre atm

Pics

Template

http://farm2.static.flickr.com/1178/533557414_b338353826.jpg
Back
http://farm2.static.flickr.com/1377/533557408_9a1a8ed2d6.jpg
Front
http://farm2.static.flickr.com/1115/533557422_4847885ce6.jpg
Top upclose
http://farm2.static.flickr.com/1167/533557400_c907b3f3fe.jpg

I'll try and get some better pic's later this week

Cheers
Thonk

Beautiful, love that top, and the body shape.

Not much of a singlecut/headless person but that top is killer. Flip the bass over and it's "ash city".
Great job.

Nice! (Post lots of pictures please.)

like it

Hey all thx for your feedback sofar :)

Small Update: i got a bit more done today on the control cavity and back plate as well as some work smoothing out the heal and lower horn there still not where i want them but better than they were ;)

(thumbs link to larger images)

http://farm2.static.flickr.com/1306/565690726_bfedae4d74.jpg (http://farm2.static.flickr.com/1306/565690726_0835b68824_o.jpg)

http://farm2.static.flickr.com/1382/565690738_c7f3a4c938.jpg (http://farm2.static.flickr.com/1382/565690738_516fbd46f9_o.jpg)

http://farm2.static.flickr.com/1062/565690...03b8b6.jpg (http://"http://farm2.static.flickr.com/1062/565690790_12be2d41d4_o.jpg)

http://farm2.static.flickr.com/1094/565690800_2a585b0bc8.jpg (http://farm2.static.flickr.com/1094/565690800_4092280e57_o.jpg)

http://farm2.static.flickr.com/1062/565690790_929903b8b6.jpg (http://farm2.static.flickr.com/1062/565690790_12be2d41d4_o.jpg)

http://farm2.static.flickr.com/1108/566052657_0cc562950d.jpg (http://farm2.static.flickr.com/1108/566052657_4b3817f16f_o.jpg)


Starting to think about finishes and i think i want to go for a non yellowing wipe on gloss poly (id like to keep the ash as white as possible)

i've done some limited reading and found i'll need to use a water based poly to aviod any yellowing,now i know you guys state side have the minwax wipe on poly but it doesnt seem to be stocked anywhere here in the UK and noone will allow me to import it :(

The closest thing i could track down seems to be this Polyacrylic (http://www.generalfinishes.co.uk/index.cfm?page=store&CID=24)

so if anyone's used the Polyacrylic or know of a good UK based alternative to minwax wipe on poly plz fire me a heads up :)

Cheers
Thonk

Ah man! Pleace put a head on it! It will look 100 Gazilion times better . . . God i dont see the beauty thing with headless either do i see whats good with it?.

Love body and all but now im frustrated. Oh well its your bass.

man that is sick

Like the headless on that. How are you going to execute the tuning and special nut?

Looking good!!
How did you manage to get the electronics cover so well matched?:confused: That is plain unbeelievable.:eek:

Hey all thx for the comments and feedback :)

I was going to make this one head'ed but i got some left over headless hardware from my first build which i got cheap while trying to decide on its spec so i thought id use it up on another headless ;)

Suburban :Well as the lumber the body wings came out of was 10" wide x 2" thick and i only needed a 1 1/2" thickness for the wings (over all thickness of the bass is 1 3/4") i rough cut the lower wing shape on the bandsaw then flipped it on its side and sliced about 1/4" off all the way along to give me an almost matching piece for the backplate :hyper:

Cheers
Gizmo

btw i found some water based wipe poly at a local hardware store which im trying out on some scrap the discription on the tin ticks all my wants boxes so i'll give it a try,stuff is milky white in the tin but drys clear and is non yellowing and smells like burnt flesh!

wow...just...wow, where'd u get a maple piece that big?

wow...just...wow, where'd u get a maple piece that big?

This piece came from an ebay seller veddermountain

Vedder Mountain Hardwoods are based in Canada & if i recall correctlly this piece was only about $12 !(shipping cost me about $20 to the UK) i was a bit pissed at the time as i missed its sister piece(planned to do back and front)by about 5 seconds i hit BIN on this one & went for the other and it was already sold :(

Here's a full daylight shot of the top before it was cut
wiped with white spirt's

http://farm2.static.flickr.com/1342/570931508_1c1bcce466.jpg (http://farm2.static.flickr.com/1342/570931508_f23da82151_o.jpg)

i think this was about 21x8x1/4 before i hacked it up ;)

cheers
Thonk

if that was a five string i'd snap that up!

No way, that top was only $12?!

Hey all a little bit of an update

TT
http://farm2.static.flickr.com/1043/707992788_5ddfd4354a.jpg

FB
http://farm2.static.flickr.com/1130/718359472_eac03e82fd.jpg

Glue up (there are small pins between the FB & neck to stop slippage & i added a few more clamps after this was taken)
http://farm2.static.flickr.com/1215/718359508_13cf0f09e8.jpg

http://farm2.static.flickr.com/1399/728854327_339e471e11.jpg

Going with emg pups/pre because i just love the sound of them in my 6 SC just gotta wait for a week or 2 to get them shipped over from the states

UK based EMG resellers want stupid money for them ($320 & thats just for a BQS system i kind you not...)

Cheers
Steve

wow...that bass looks beautiful

I'll take one!!:)