Hi, I have several pieces of AV gear to sell. All of these have came from a conference centre, job lot bought by my brother (I am selling these for him) They weren't used much as far as i can see; some pieces are slightly scratched but these are very superficial (most likely just from being rack mounted) Anyway you will see for yourself in the pictures that are include for each item :) I don't have much knowledge of this stuff (C'mon i play bass) so for a lot of the items i must confess i have just copy and pasted from what i can see as being informative sources. However, if you have any question i will do my best to answer them ;)


Kramer's SG-6003B

A broadcast level Black Burst / Color Bar Generator with three identical Black Burst outputs, a color Subcarrier output, a Color Bar output and two 1 kHz, crystal stabilized audio outputs. State-of-the-art technology is used throughout the SG-6003B - crystal controlled sync & Chroma oscillators, accurate internal sync/Subcarrier genlock, both with long term stability. The number of outputs may be increased by using one of Ocean Matrix's several video distribution amplifiers.



Features:

* Studio master genlock to one stable source
* Black or Color Bar reference for professional video cameras that need a stable reference
* Test and alignment tool for professional video/audio equipment
* Color Bar generator as filler for recording in a duplication studio
* Color Bar Saturation: Preset to 75%, may be ordered at 100%
http://i170.photobucket.com/albums/u278/jamiesb/Kramer-SG-6003B-front.jpg
http://i170.photobucket.com/albums/u278/jamiesb/Kramer-SG-6003B-back.jpg
Kramer FC-10 Composite YC Transcoder


The Kramer FC-10 is a format converter designed to interface between composite video and s-Video (YC). The decoding channel converts a typical composite video signal on a BNC connector to s-Video on a 4pin connector. Encoding (s-Video to composite) is also provided, allowing simultaneous bi-directional operation. The FC-10 is a compact desktop size unit but two can be installed in a standard 19” rack using the RK-50R rack mount kit if desired (Sorry this isn't included). A 12 volt power supply will be required for typical use but the optional, rack mountable VA-50P can power up to six Kramer devices requiring 12VDC.

http://i170.photobucket.com/albums/u278/jamiesb/Kramer-FC10-front.jpg
http://i170.photobucket.com/albums/u278/jamiesb/Kramer-FC10-rear.jpg

Procon Audio Video 10x1 Switcher - Model No.3810
http://i170.photobucket.com/albums/u278/jamiesb/Procon-VAswitcher-front.jpg
http://i170.photobucket.com/albums/u278/jamiesb/Procon-VAswitcher-rear.jpg
Procon Switcher Model No.7540
http://i170.photobucket.com/albums/u278/jamiesb/Procon-Switcher-7540-front.jpg
http://i170.photobucket.com/albums/u278/jamiesb/Procon-Switcher-7540-back.jpg
Procon Distribution Amplifier Model No. 4616
http://i170.photobucket.com/albums/u278/jamiesb/Procon-DistAmp-4616-front.jpg
http://i170.photobucket.com/albums/u278/jamiesb/Procon-DistAmp-4616-back.jpg


I can't seem to find much on the 'net about these items. Mainly due to not being able to access the procon catalogue PDF file, i'll try get some info on these tomorrow :)

Allen and Heath DR66 24-bit Digital Mix processor

I think the A&H website can describe this product quite well :) :

http://www.allen-heath.com/US/DisplayProduct.asp?pview=22

http://i170.photobucket.com/albums/u278/jamiesb/AllenHeathDR66-rear.jpg
http://i170.photobucket.com/albums/u278/jamiesb/AllenHeathDR66-front.jpg

Make offers on this gear as i don't know much about the value, i hope offers aren't banned on these forums ( see my other thread ;) ). Postage will be £5 PER item for next day courier anywhere in the UK and around £15-£20 for Europe. I can check how much shipping to the US would be too :)

Watch out in the next couple of days for some CRESTRON stuff ! :D

Thanks for looking, Jamie

Post prices or I will have to close the thread. Thanks.

Right, sorry i didn't realise that you needed to post prices, yu can't just take offers ?

£200ish for the SG-6003B which RRP is $880
£150 for the YC transcoder
£175 for each of the Procon items
£100 for the Allen and Heath, this retails for £900 but they don't seem to sell for very much at all :confused:

I am flexible on the pricing, considering the RRP of all these items i do believe what i have stated is pretty decent but if you want to 'haggle' feel free :) I realise that a bass guitar forum isn't the best place to advertise these, i'll have a look else where ;)

I have given the prices as a guide but i'd be happy just to shift these for maybe a lot more :)

I'm going to try again with these, the prices listed are guides of the average price i see the gear going for but it is taking up a lot of room so it has to go. I'll even go so far as £75 a piece!

I will perhaps have to turn to ebay ?