prsbass
09-29-2007, 12:42 PM
I built this bass and did the finish myself.
Specs:
Warmoth Body
USA Custom guitars neck
Darkstar pickup
Hipshot ultralite tuners
Straplock buttons
Hipshot vintage bridge
Bayou audio cable prewired the controls
I paint shielded all the cavities and the electronics are grounded under the bridge and in the control cavity
The paint is a Shoreline Gold over a white primer with 9 very thin coats of nitro wet sanded and buffed to a mirror finish.
The bass does buzz a little because the pickup is a single coil but it's very faint.
There are some defects in the paint, I'm including a pic that point some out the rest are to small to photograph.
The fender headstock sticker is a non-original reproduction. I didn't put any finish over it so the buyer may want to do so. If my first asking price is met I will spray this out before shipping.
I leveled and dressed all the frets when I assembled the bass.
The case is one of those Fender G & G cases with tweed exterior.
$600 shipped to lower 48
http://img.photobucket.com/albums/v475/silverbass/IMG_3921.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_3924.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_3925.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_4038.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_4041.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_4040.jpg
Specs:
Warmoth Body
USA Custom guitars neck
Darkstar pickup
Hipshot ultralite tuners
Straplock buttons
Hipshot vintage bridge
Bayou audio cable prewired the controls
I paint shielded all the cavities and the electronics are grounded under the bridge and in the control cavity
The paint is a Shoreline Gold over a white primer with 9 very thin coats of nitro wet sanded and buffed to a mirror finish.
The bass does buzz a little because the pickup is a single coil but it's very faint.
There are some defects in the paint, I'm including a pic that point some out the rest are to small to photograph.
The fender headstock sticker is a non-original reproduction. I didn't put any finish over it so the buyer may want to do so. If my first asking price is met I will spray this out before shipping.
I leveled and dressed all the frets when I assembled the bass.
The case is one of those Fender G & G cases with tweed exterior.
$600 shipped to lower 48
http://img.photobucket.com/albums/v475/silverbass/IMG_3921.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_3924.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_3925.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_4038.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_4041.jpg
http://img.photobucket.com/albums/v475/silverbass/IMG_4040.jpg