iriegnome
01-28-2008, 12:30 PM
I have an SWR Bass Monitor. This is the Pre-Fender Bass Monitor with 1/4" inputs and Speakon Inputs. Not the older Banana Jacks. The speaker is in perfect working condition. I am looking to sell it for only 1 reason, I just spoke with Jorg at Schroeder Cabinets and he is going to make me a Schroeder version of the Bass monitor. I would then have all matching Schroeder cabinets. (VERY IMPORTANT TO A CRAZY PERSON LIKE ME)...
So, From SWR - - -
"Specifications – Bass Monitor 12
Impedance: 8 ohms
Power handling capacity: 250 Watts RMS
Finish: Black Ozite carpeting with stack lock corners, rubber strap handle, vibration-free speaker grill
Construction: 3/4" 7 ply void free domestic maple or birch, marine grade plywood.
Porting: front/bottom slot
Sensitivity: 98dB SPL @ 1W1M
Frequency response: -3dB @ 60Hz and 18KHz
Size: 16"W x 22.25"H x 17.75"D
Weight: 33 lbs.
Speaker Complement
The Bass Monitor 12 features one 8 ohm, 12" cast frame, custom SWR driver and a single LeSon TLX-1 piezo tweeter (also referred to as "ferro-electric"). The tweeter is intentionally wired out-of-phase.
Input Panel
The Bass Monitor 12 features a recessed metal input panel that includes two parallel 1/4" input/output jacks, two parallel Speakon jacks, and a tweeter attenuator control.
Tweeter Attenuator Control
The dial found on the input panel of the Bass Monitor 12 is the tweeter attenuator control.
This cabinet is a 2000-2003 model.
I will post pictures either tonight or tomorrow.
$300 + shipping or best offer.
So, From SWR - - -
"Specifications – Bass Monitor 12
Impedance: 8 ohms
Power handling capacity: 250 Watts RMS
Finish: Black Ozite carpeting with stack lock corners, rubber strap handle, vibration-free speaker grill
Construction: 3/4" 7 ply void free domestic maple or birch, marine grade plywood.
Porting: front/bottom slot
Sensitivity: 98dB SPL @ 1W1M
Frequency response: -3dB @ 60Hz and 18KHz
Size: 16"W x 22.25"H x 17.75"D
Weight: 33 lbs.
Speaker Complement
The Bass Monitor 12 features one 8 ohm, 12" cast frame, custom SWR driver and a single LeSon TLX-1 piezo tweeter (also referred to as "ferro-electric"). The tweeter is intentionally wired out-of-phase.
Input Panel
The Bass Monitor 12 features a recessed metal input panel that includes two parallel 1/4" input/output jacks, two parallel Speakon jacks, and a tweeter attenuator control.
Tweeter Attenuator Control
The dial found on the input panel of the Bass Monitor 12 is the tweeter attenuator control.
This cabinet is a 2000-2003 model.
I will post pictures either tonight or tomorrow.
$300 + shipping or best offer.