Hi my bass is Koa and has a Tung Oil finish. Bought it new from Carvin in 96. The finnish is starting to show wear around the pickup area and it just don't feel as nice as it used to. If I buy a Bottle of pure Tung Oil and apply a coat will this help? And if so what's the best way to go about this?
Thanx in advance JP

Two things:

First, you probably don't want pure tung oil. It dries very slowly. Most manufacturers use a tung oil/varnish blend. I use Formsby's low gloss.

Second, You might want to clean the area with mineral spirits and/or fine steel wool before applying the oil. Then, apply some oil to a rag, and rub into the worn away spot. Very simple. Do a couple of applications, allowing the oil a day to dry in between applications.

Thank you sir. I'll give it a try found that very stuff on the web and ordered some. Thanx again.
Oh by the way you've got some tasty looking basses comin out of your shop! PEACE

I love tung oil finishes their very easy to work with if you are patient between coats.

I just applied some Formsby's high gloss to the neck of my Pedulla T-bolt fretless. Dang! It turned out bitchen. But I think it originally had low-gloss on it, but I like the look, feel and sound better now. I sure was nervous about it when I did it, but it just turned out cherry.