This is a search-engine-friendly text mirror of the TalkBass Forums

VIEW FULL LIVE VERSION : securing a wireless during performance


LeftyLB70P
06-10-2008, 09:21 AM
For those of you that actually get out and work on stage, how do you secure your wireless transmitters? I use the X2 system and have to switch basses regularly so taping to a strap isn't an option. I will at some point just buy a 2nd transmitter but in the meantime does anyone have a system that actually works for them? Attaching to my belt works however it is not ideal due to the amount of movement. I move A LOT during performances and my basses move even more (I play rock and I go for the all out 'rock star' type performance; hoisting my bass into the air regularly, positioning it at my pelvis, all the goofy things that go into a 'big show' type of performance).

I am wondering if anyone uses some sort of ....... sheath, bag, ??? .... to 'house the transmitter in some way that allows free movement and as little adjusting as possible. When I am working, adjusting my transmitter is not something that I want to have to do often and having unreliable gear in any way is not professional IMO (whether it is not reliable in function or needs constant attention,etc).

Thanks for any opinions/options/advice.

VisualShock
06-11-2008, 04:37 AM
Get a pounch sort of thing for it, on a belt sheath
simmilar to
http://www.barsupplies.com/images/masterleathercase.jpg
and clip that onto the strap. when you want to swap over, either remove the whole sheath, or remove the transmitter, and put it into another sheath on another bass

Purple Haze
06-11-2008, 05:52 AM
Perhaps you COULD tape it to the strap, and then instead of having to take it off the strap and attach it to another strap, you could just take the strap off your bass and put it onto the spare bass?

LeftyLB70P
06-11-2008, 06:32 AM
Thanks guys. Those are good ideas (I have thought about the switching strap solution and came close but ultimately decided against) but not just right yet. The pouch/sheath thing is where I am headed as a temporary solution I think. I appreciate the ideas.

Dan1099
06-11-2008, 09:40 AM
Thanks guys. Those are good ideas (I have thought about the switching strap solution and came close but ultimately decided against) but not just right yet. The pouch/sheath thing is where I am headed as a temporary solution I think. I appreciate the ideas.

I keep mine secured to the strap. I use dunlop straplocks on all my basses, so it takes me three seconds to undo it from one, and move it to the other.

mjolnir
06-11-2008, 09:46 AM
I keep mine secured to the strap. I use dunlop straplocks on all my basses, so it takes me three seconds to undo it from one, and move it to the other.
+1

JimmyM
06-12-2008, 01:36 AM
I tape it to the strap and use the same strap on all basses, but our guitarist sticks his in his rear pants pocket.

spook396
06-12-2008, 01:00 PM
Seems we're the same kind of player, performance - wise.

I use a cable from bass to transmitter that's about 18" or longer, (a bit of trial and error needed to determinr the best length for you), and put the transmitter in the back pocket of my jeans.
You don't lose it, and changing instruments is easy - unplug one and plug the other back in..

georgestrings
06-13-2008, 10:30 PM
I use the X2 also, and with a 36" cable, putting the transmittor in my left back pocket has worked quite well - to change instruments, I turn off the receiver, unplug the transmittor from the bass I'm using, swap basses, plug back into the incoming bass, and turn the receiver back on... I have also just muted at the tuner, but since the morion's basically about the same to turn the receiver on and off, I just do it that way - because I didn't like seeing the receiver's meter jump during the process if I just muted at the tuner, instead of turning the receiver on and off...

I can swap basses pretty quickly using the above method, and by putting the trans in my back pocket - with the clip grabbing the outside of the pocket - I haven't had any troubles yet - and I'm a very active live player...



- georgestrings

JustOpenYourMind
06-23-2008, 11:24 AM
I tape it to the strap and use the same strap on all basses, but our guitarist sticks his in his rear pants pocket.

Seems like the best idea, changing straps takes 2 seconds,

Pilgrim
06-23-2008, 03:57 PM
I have an AKG wireless with a decent metal clip on the transmitter. I just clip that onto the strap and it stays put. I could easily transfer it to another strap if needed. I'd think a good strong clip would work OK.

Just J
06-23-2008, 05:14 PM
I put it in my back pocket.

butchblack
06-23-2008, 07:04 PM
I use an inexpensive cell phone case I got at Sears for $5.00. I run it through my belt. You could contact Butch at Bayou cables to see if he would make you a bass to transmitter cable longer then 3 ft. I would think 4-5 feet would be plenty for what you need

TimmyP
06-29-2008, 03:45 AM
If you replace the plug on the pack's cable with a shorting ("silent") plug, you won't have to turn off the receiver or mute the tuner.

jambassist
06-30-2008, 03:59 PM
I've got the X2 also and wear a wider strap. I went to Staples and got a small Blackberry case. There's no strap over the top, but the transmitter fits deep into the case and is a friction fit. The nice thing is the clip on the pouch pivots. Fits pretty secure so you might want to check it out. Take the transmitter along too and test out which one fits best.

CapnSev
06-30-2008, 05:29 PM
I keep mine secured to the strap. I use dunlop straplocks on all my basses, so it takes me three seconds to undo it from one, and move it to the other.

+1

Same thing I do.

Johnny Crab
06-30-2008, 05:46 PM
I keep mine secured to the strap. I use dunlop straplocks on all my basses, so it takes me three seconds to undo it from one, and move it to the other.Same here with the strap & Dunlops.
The wireless(Sennheiser 172) is in my back pocket(dress nicely shows) or clipped to my back pocket(jeans).

jtc_hunter
07-07-2008, 11:01 PM
I keep mine secured to the strap. I use dunlop straplocks on all my basses, so it takes me three seconds to undo it from one, and move it to the other.

I do the same.

Munjibunga
07-08-2008, 01:16 AM
You need the Neotech Wireless Pouch (http://www.musiciansfriend.com/navigation?q=neotech+wireless+pouch&src=3WWRWXO1&ZYXSEM=0). I have a couple of these. They go right on the strap. Get the medium one. $11.99 at MF.

http://img3.musiciansfriend.com/dbase/pics/products/0/2/2/225022.jpg

JimmyM
07-08-2008, 02:12 AM
Aren't those wireless pouches a little...um...girly?

Munjibunga
07-08-2008, 09:05 AM
Hey! I own a pink bass. Girly doesn't scare me.

Marley's Ghost
07-22-2008, 05:50 PM
the stupid metal clip on my X2 is useless, so I tried velcro and tape but found them too cumbersome. Now I just drop it in my front or back pocket, depending on the pants. That pouch looks tempting, though.

chrisp2g
07-28-2008, 06:34 PM
Everyone and myself in my band use those neotech pouches, well worth it.

pbass62
08-06-2008, 05:58 AM
Jim Dunlop also makes a wireless pouch, Works Great

jambassist
08-06-2008, 09:06 AM
The problem I had with the commercial pouches is they don't fit well on a wide strap. I also found I didn't like the clip on the Blackberry pouch I got from Staples. Since I like to wear the wireless parallel to the strap and pointing down, I had one made. I found an excellent leather crafter in my area. Showed him what I had and what I wanted done with it and he made it. The price was $45. Yes I know it's not cheap, but it's what I wanted, fits perfect and is made of top grade leather.

For those of you not happy with what's commercially available, see about getting something made. This guy does this stuff on the side so he doesn't have a website or commercial operation. I found out about him from the local Tandy Leather shop. Just thought I'd pass this along.

FingerPulse
08-08-2008, 10:47 AM
I have an X2 as well. Great wireless, terrible clip. I bought a blackberry clip for it, but soon after starting to use it, I started getting distortion in my signal. I thought the X2 was defective at first, but when I stopped using that case, my signal problems ceased. I deduced that the magnet and strip of metal that was embedded inside the top flap of the clip (to hold the flap shut) was causing the interference. So beware of that...