Custom Gecko 6 strings 14mm spacing for sale

pasIII · #1 04-28-2011, 01:09 PM

I'm selling my custom 6 string bass put together by Mike Lull with Warmoth parts (with many custom options). Asking $1200 for it but also consider trade with Fender American Deluxe Jazz 4 string older than 2010 model.

It is brand new, never been played. I made this bass for a musical project which disbanded before this bass was done.

I'm selling it with just the cost of parts, no labor(mike lull, plek etc over $700). My loss your gain!

It's got a Walnut body and Ebony fingerboard for tone like Matt Garrison, Hadrien Feraud. It has beautiful jazzy warm solo tone on higher register and nice Jazz bass like growl on lower register.

It has special string spacing of 14mm for fastest finger picking and chordal playing like Gerald Veasley, Steve Swallow and Carles Benavent's basses.

It's been Plek'd for lowest and smoothest action possible. Mike Lull Guitar Works Plek Pro

There is a tiny scratch on finish on elbow contour and tiny paint crack on neck socket (it's been filled and polished)

Spec.

Body: Warmoth Gecko Small light weight Walnut(custom option), Olympic White

Neck: Warmoth Gecko Small 35 inch Wenge with Purple Heart stripes, Olympic White Matching head stock (custom option), underneath is Walnut Cap! (custom option, you can't paint Wenge so they had to put walnut cap to be able to do matching head stock)

Fingerboard: 24 Frets Ebony, No Inlay (custom option)

Nut: Bone

Bridge: Kahler Fixed 14mm spacing

Pick-ups: EMG 40DC

Preamp: 18v

Control: Vol, Vol, Passive Tone

Tuners: Hipshot Ultralite

Strings: DR 18-25-40-60-80-100 Tuned EADGCF

pasIII · #2 05-05-2011, 01:55 PM

I'm also selling Rare Vintage Washburn Force 40 1984, and Schecter Ultra VI (like Fender bass VI, 30inch short scale tuned E-e)

1984 vintage Washburn Force 40. $150. Check out who's holding exact same model in the picture

Pickups has been updated to Bartolini. Bridge has been replaced to Badass II bridge.

Comes with original pickups, preamp, and bridge.

It's not in good cosmetic condition but neck feels great and sounds great! Comes with piccolo strings (tuned DGCF) but I can re-string them with regular if you wish.

Schecter Ultra VI in mint condition. I recently purchased it but realized have no use for it..... I had local luthier make the hole little bigger on bridge for thicker E and A strings but it'll ship with regular bass vi strings which came with the guitar. It's in MINT condition never left home. less than 3month old.

Ultra VI, Mahogany Body, One Octave Below Standard Tuning, TonePros System w/Custom Brass Saddles Bridge

Specs
Construction: Set Neck
Available Bodies: - Mahogany
Neck: 3-pc Mahogany
Finger Board: Rosewood
Frets: 22 Medium
Inlay: MOP Blocks
Tuners: Grover
Pickups: Duncan Designed FG-101
Electronics: Vol/Tone/3 Mini On-Off-Tap
Available Bridges: - TonePros System w/Custom Brass Saddles
Scale: 30"
Hardware: Chrome
Available Colors: - Gloss Black (BLK)
- Silverburst (SVB)
Available Cases: - None
Available Lefty: Yes

Tuners -Grover
ROTOMATICS® WITH 18:1 GEAR RATIO (102-18 SERIES) The original Rotomatic® with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination

Finger Board -Rosewood
The most common fretboard, Rosewood is naturally oily, and works well for any surface that sees frequent human contact. The sound is richer in fundamental than Maple because the stray overtones are absorbed into the oily pores.

Pickups -Duncan Designed FG-101
Captures the big, brash sound of the great rockabilly hollow-body guitars with a touch of "snarl" thrown in.

Neck - 3-pc Mahogany
Made with 3 pieces of mahogany for extra stability. 3 piece necks can withstand the test of time. Where standard necks may show aging defects from temperature and moisture changes throughout the years, the 3 piece neck will stay nice and straight for a lifetime of playability.