For sale is my rarely used not a year old yet Rebop MM 5 string
-It sounds great, plays like butter.
-The wood is European Alder back, with a beautiful quit maple top.
-The "TOP" makes up 60% of the body, which really adds to the tone of the bass.
-Transparent blue stain, with satin finish.
-Maple fretboard and neck with Black crown inlays.
-Emg HZ MM pickup, and Tone pump with trim pot for the Pre amp
-Condition is 9.5 out of ten, There are two light blemishes noted in the pictures that are visible with the right angle and lighting. I put my leather strap in the case once and it made not scratches or dents just light blemishes on the bass. Also one small scratch on the bottom from the strap as well.
The Price is $1,050 Shipped to United States only
All other specs from spector's site are below.
Thanks for looking.
More photos below http://s1229.photobucket.com/user/Ma...l_share&page=1
FEATURES OF THE EUROPE SERIES™ BOLT-ON(REBOP-MM™) MODELS
Our Europe Series™ Bolt-On neck models all feature the fully carved Original NS-Body™ Design
Each model features our ORIGINAL DEEP SOCKET NECK INSERT™ design. Stuart Spector invented this neck/socket design in 1982 to allow bolt-on basses to have increased sustain and stability.
Our Europe Series™ Bolt-On neck models all feature the 9-volt TonePump™ Tone-Control Circuit (designed specifically for us using specs by Stuart Spector and PJ Rubal) and a single EMG® MM-HZ™ single and dual coil tapping pickup in the bridge position.
Available in FM (Figured Maple) blue-black stain matte finished top with European Alder Backs
3 Piece Rock-Maple graphite reinforced neck with 24 fret necks with Rosewood or Maple fingerboards and mother of pearl Spector® Crown Inlays (Rosewood Fingerboard Only).
SPECS & OPTIONS
(SPECTOR® IMPORTS MODEL MADE IN OUR CZECH REPUBLIC FACTORY)
NECK CONSTRUCTION: 3-Piece Rock Maple
Carbon Fiber Reinforced
Bolt-On Neck Construction
NECK INLAYS: Spector® Crown Inlays™
- Black Composite Material
NUMBER OF FRETS: 24
SCALE LENGTH: 35"
STRING SPACING AT BRIDGE: 0.66"
NUT WIDTH: 1.81"
TRUSS HEX KEY SIZE: 4mm
TRUSS ROD TYPE: Stainless steel - Double-Action
NUT MATERIAL: Graphite
OPTIONS: Maple Fingerboard
This model features the Original Spector® NS-Bass™ Bolt-On Body Design.
BODY CONSTRUCTION: Figured Maple top with European Alder back
TOP: FM (Figured Maple): Quilt Maple
COLOR OPTIONS: Transparent Blue Stain
FINISH OPTIONS: Matte Polyurethane
BRIDGE: Spector® Europe Series Locking Bridge™
BRIDGE HEX KEY SIZE: 2mm
TUNERS: Sealed Gear Tuning Machines
STRAP BUTTON: Standard Strap Button
TONE CIRCUIT: Spector® TonePump Tone Circuit™
CIRCUIT TYPE: Active - 2-Band
CIRCUIT VOLTAGE: 9-Volt
NECK PICKUP: EMG® MM-HZ™
PICKUP TYPE: Passive - Single/Dual Coil Tapping
Limited Lifetime Warranty
to the Original Owner
Our Europe Series™ instruments come with a lifetime warranty against defects in materials and workmanship to the original purchaser. The instrument must be purchased from an authorized SPECTOR® dealer and the owner must provide proof of purchase time of warranty claim.
Fingerboard Width Neck Thickness
Nut 12th 24th 1st 12th
1.81 in. 2.41 in. 2.75 in. 0.86 in. 0.93 in.
Spector http://www.spectorbass.com/Euro-NS-BO/rebop4mm.html http://s1229.photobucket.com/user/Ma...l_share&page=1