Testing the waters with my Hanewinckel Draken 5-String. Here are some specs:
34" Scale
Alder body w/ Walnut Top (Draken body style)
3-piece Maple Neck
Pau Ferro fingerboard w/ Abalone dot inlays (MOP inlays on side)
Abalone logo inlay on headstock
3/4" string spacing at bridge
Nordy Big Singles pickups
Nordy 3B-5b preamp (Volume-Blend-Passive Tone-Mid (pull frequency selector)-Bass/Treble stack)
Dunlop Straplocks
Hane bridge
Gotoh tuners
Built in 2009
Comes with TKL 8536 hardshell case and Hane leather strap
Preamp Volume is push/pull for Active/Passive, and the Passive Tone control also works in Active mode. Mid frequencies are 400 Hz (in down position) and 1kHz (in up position). I'm also pretty certain all the wood is quartersawn. There are some light surface scratches on the body, but nothing that couldn't be sanded out. Pete suggests using Howard Feed-N-Wax to maintain the oil finish. There are some dings shown in one of the pics, and there is another ding on the back of the body on the neck heel (this pic will have to come later).
Asking for
$1,400 shipped in the lower 48 States. As for trades, honestly, I really want a StingRay 5 HS as I think it would be just right for my band.

This pic was taken before the ding on the heel occurred

This shows the bass in the TKL 8536 hardshell case

These dings are from one of those silica gel packets inside the gig bag coming open. I should have taken the packet out.