Closing Thread
Rbass specs are:
chestnut top on an alder/maple toneblock body
35" scale 3 pc maple neck w/
macassar ebony 24 fret fingerboard
macassar ebony pickup covers (not currently on the bass but will be included
19 mm spacing at bridge
Hipshot A-style hardware black
bartolini 3 band pre with mid frequency selector
Bartolini X55CBJD - Classic Bass Series
R bass tilt back head stock for that killer low B
flat C-shape neck in the low register to D in high register
3 pc maple neck
satin finish neck and body
black painted ramp between the pickups
**There is a brass insert like piece in the B-string slot as I think the person before me had a much larger B-string and it may have caused some buzzing. I have changed strings many times and just slide it back in to place with no issue. It currently has a .125 B on it.
This bass is from 2001 and has been played. These pics below are from a previous owner so I hope he doesn't mind that I am using them. I can take other pics for those who are interested. A previous owner applied epoxy to the lower cutout and between the two pickups where your thumb would rest to stop the wood being worn away. I never notice it until I look for it, but it is there and if you want a perfect looking bass, this isn't the one. That said, this thing is a gem and sounds killer. I have clips if you are interested.
Cell phone pics in current condition
__________________
Christian Praise & Worship Bassist Club Member #94
Sadowsky Club Member #225
Thunderfunk Amp Club Member #26
Source Audio Club Member #3
5-String Club Member #434
www.thecongressband.com 
