Up for sale is my Hamer Cruise Bass 5-string with the 2Tek bridge. The previous owner added EMG electronics. Unfortunately, in its time with me, this bass had a nasty smack on a table corner on the elbow contour, which put a fairly deep peck in the finish. It's stable and doesn't go through to the wood, but it's a tad unsightly. Other than that, it has a fair amount of swirls visible in the finish under direct light and a little ding behind the B-string saddle on the bridge, plus what looks like a small burn mark from a soldering iron under the neck volume pot. There's some pretty substantial buckle worming on the back as well, but again, nothing through the finish. None of this is visible from five feet away, but I want to be as detailed as possible so that you know what you're getting.
Finish damage aside, the frets are in great shape and it's easy to get a good setup. Bass includes the Hamer truss rod tool and original, very nice Hamer HSC. If there's anything else you want to know, ask and I'll answer it as best as I can. I'll get some photos of the damage later today or tomorrow.
No trades, please. Let's start this at $700 + shipping, but I'm open to offers. I prefer US Postal Money Orders or PayPal e-check-no PP direct transfers, as I'm losing money on this as it is.
Here's a shot before the aforementioned elbow contour ding happened.
Please PM me or post with any questions.
