Heavily Upgraded/Modified Peavey Cirrus 5 fretless!

**Matt Morgan** · #1 12-28-2010, 11:00 AM

I purchased this Peacock Blue Peavey Cirrus USA five string new from The Bass Place earlier this year.

I had it converted to fretless by Carl Pedigo (Lakland Basses) in Chicago. He removed the frets, filled the fret slots with a nice light colored maple, then proceeded to EPOXY coat the fingerboard, level and radius the board, install a new, properly cut nut, etc. He did a spectacular job!

I then replaced the hardware with all new black Hipshot Ultra-light tuners, a black ABM bridge, black knobs, and black strap buttons/locks.

I then had the Peavey/Millennium pre-amp (with variable mid range sweep) installed to top it all off.

In the interest of full disclosure for the OCD types like me; during the epoxy process a tiny smear of epoxy got on the back side of the upper horn as well as a a tiny scratch. I tried to take photos of it but they are so small it was difficult. Carl said that the epoxy and scratch could be buffed out.

I'm asking $1200 for this bass, shipped anywhere in the lower 48 in its original Peavey hard shell case.

This bass has had all these significant (and pricey!) mods done for you! All you have to do is send $1200 via PayPal and I will ship it the day the funds clear.

Please, no trade offers. Thanks and feel free to PM me with any questions.

**Matt Morgan** · #2 12-29-2010, 05:49 AM

Bump.

StuartV · #3 12-29-2010, 08:41 AM

Free bump for some beautiful wood and very tasteful mods.

**Matt Morgan** · #4 12-31-2010, 08:23 AM

End of the year bump! Offers welcome.

MarkA · #5 01-01-2011, 01:45 AM

**Matt Morgan** · #6 01-02-2011, 09:51 AM

Bump.

bass_lord_mutha · #7 01-02-2011, 02:16 PM

Do you still have the original hardware/electronics?

**Matt Morgan** · #8 01-02-2011, 03:33 PM

Sorry but I no longer have the original tuners, knobs, bridge, strap-locks, pre-amp....or frets!

**Matt Morgan** · #9 01-08-2011, 09:07 AM

Bump!

MNAirHead · #10 01-10-2011, 02:26 AM

tasteful mods bump

**Matt Morgan** · #11 01-23-2011, 09:54 AM

OK, here's the situation: I've got a couple new Dingwalls on the way so I really need to sell this bass!

Make me an offer!

Thanks.

**Matt Morgan** · #12 01-24-2011, 03:38 PM

Bump.

alembic5 · #13 01-24-2011, 10:03 PM

Man, that is almost exactly what I've considered several times for my Cirrus 6er. Sure wish I had the cash to pick this up! Beautiful bass.

**Matt Morgan** · #14 02-06-2011, 02:02 PM

NEW LOWER PRICE! $1200 shipped.
I really need to move this along. PM with any questions.

Mo_Fonk · #15 02-07-2011, 06:12 AM

Can you please post close ups of the epoxy on board ? Thanks

**Matt Morgan** · #16 04-01-2011, 05:13 PM

Sorry for the late response. I've been out of town for a few weeks. Here are some close ups of the fingerboard. Its a beautifully piece of Pau Ferro with a fantastic epoxy coating as described in my original post.

If you have any questions, feel free to PM me.
Thanks!

**Matt Morgan** · #17 04-05-2011, 05:51 PM

I'm not going to give it away, but I'm a highly motivated seller! Offers welcome.

JEDI BASS · #18 04-06-2011, 02:53 AM

Carl has impressed me everytime I send work his way. And he's especially great at setting up a fretless!

**Matt Morgan** · #19 05-25-2011, 05:27 PM

All right...here's the deal. I have had lots of questions, lots of interest but no solid offers.

So, I'm dropping the price to absolute rock bottom. I need to sell this bass.

The first offer at or about $1000 gets this shipped to their door. It includes the new case, all the case candy still in the original packaging (manuals, cards, wrenches, strap locks, etc.), a protective slip that protects the fingerboard from the strings during shipping/transport, and a new set of DR High Beams.

Hit me up and let's make a deal!

**Matt Morgan** · #20 05-28-2011, 07:40 AM

Bump.