-I have my eye on something and this needs to go to make it happen. This will be the last reduction. If the Vinny doesn't go at this price I'll keep it and enjoy it
.-
Zon
VB-4, swamp ash body, natural satin finish- shows no fingerprints! Phenowood board and composite neck. This is an older one so it has the set neck not the current bolt on. Zon is using bolt on's now to keep manufacturing costs down, but they don't have the sleek feel of the neck joint of the older ones like this one. Optional (upgrade) Black hardware. Comes w/ factory Zon gigbag and owner's manual. I need to off some gear. This is a super nice, super rare, responsive, toneful bass. To build a Vinny similar to this would cost you $2150, and even then it would be the bolt on model rather than the set neck. The Vinny uses regular type strings; you do not have to track down double ball strings or any special type string. You can use any regular string type you choose.
There are a few light player's type marks on the back from a previous owner; could be from a shirt button or something similar. They are small and not deep like a belt buckle would cause. Hard to see with the satin finish. Couple of scuffs to the gigbag, but nothing that impairs the function at all. Zippers are all good.
Weight is 8lbs 1oz. More pics at website below.
SOLD PENDING FUNDS!!
PayPal accepted. US only please. No trades.
70 positive feedbacks (100% rating) at eBay under "dkmustangs"
Vinny Specs
Body
Material: Two-piece swamp ash
Finish: Flat satin (gloss available at extra charge)
Color: Natural
Neck
Type: Composite, set neck design
Scale length: 34" scale
Finish: Flat urethane
Fingerboard: Phenowood w/side dot markers
Radius: 12"
Nut: Graphite
Frets/size: 24/medium
Width at nut: 1.532"
Width at 24th fret: 2.437
Electronics
Type: ZB5 active system made for Zon by Bartolini
Functions: Master volume, pickup blend, bass, midrange and treble controls Boost/cut ±15dB
Power requirements: One 9-volt battery
Life expectancy: 2500 hours of continuous use
Pickup
Make: Exclusively designed for Zon by Bartolini
Type: Neck: narrow-aperture, passive, linear single-coil design JB-style shell
Bridge: narrow-aperture, passive, linear single-coil design JB-style shell
Hardware
Bridge: ABM machined brass with fine-tuners
String spacIng .750" /19mm (string-to-string center)
Tuners: Barrel type at bridge
Finish: optional black
Options
General: • Black hardware
Other
Gig bag included
Thanks for looking....
pics here:
http://s95.photobucket.com/albums/l1...6/Zon%20Vinny/ 
