Carvin DCM 1204

spiritbass · #1 03-14-2011, 05:08 PM

I purchased this new and it was used for practice a few times; never stressed. I noticed that Carvin has discontinued it. This unit has four amps under the hood. Each will push 200 watts into eight ohms, 300 into four. Channels two and three can be bridged to push 600 watts into an eight ohm load. Each channel has its own 1/4" output, but channels one and two share a 4-pole speakon output as do three and four. I am including the pictured cable which has one of the 4-pole (NL4FC) speakons. One leg of the cable is 25' and the other 28' with regular speakons on the ends.
More info: http://www.carvinguitars.com/manuals/DCM1204.pdf

$300 plus half the cost of shipping (I'll cover the other half).

spiritbass · #2 03-15-2011, 01:15 PM

Jazzdogg · #3 03-15-2011, 01:27 PM

I've used one of these to drive stage monitors for the past ten years. It's always worked well.

spiritbass · #4 03-15-2011, 03:20 PM

Peavey & Carvin - don't go below minimum impedance and they'll run forever! That's exactly why I bought this one; to provide four monitor mixes. Thanks for the bump!

spiritbass · #5 03-17-2011, 03:29 PM

Now only $300 plus half of the actual cost of shipping. Talk about bang for your power amp buck.

spiritbass · #6 03-21-2011, 07:25 PM

Monday bump!

spiritbass · #7 03-23-2011, 01:28 PM

Still available.

**nervous** · #8 03-23-2011, 09:09 PM

Also had one of these and loved it. Great amp for a nice price.

I might know someone who's interested. I'll forward the info.

spiritbass · #9 03-24-2011, 12:57 PM

I don't know of an equivalent product. I bought it to run four different monitor mixes. Too handy IMO, but I no longer have a need for it... Thanks for forwarding the info, Nervous!

spiritbass · #10 03-25-2011, 10:03 AM

SOLD.