I have for sale two mint condition, like new amps.
Amp #1: is a
Ampeg Micro-VR Bass rig with two Ampeg SVT 210AV cabinets and a Micro-VR head.
I'm asking $700. It would cost a lot to package and ship, so I'd
prefer pick-up only in Westchester County, NY. But, if you're willing to give in to UPS's extortion, pay for shipping and I'll send it to you.
The stack, which has four 10" speakers (each cabinet is a 2x10), puts out 200 watts at 8 ohms, 150 watts at 4 ohms. It sounds amazing. Even though it's fully solid state, it can get close to that old-school Ampeg sound from the '70s.
This stack is very compact and light. It weights about 60 lbs. It'll easily fit in the corner of a room. The entire rig stacked is less than 5 feet tall. I bought it new and it has never left my house. It has only been used for practice and never taken out to be gigged. As I said, it is in mint, like new condition. There is not a scratch on it and it works as it should.
Here are the specs for this rig:
Micro-VR amplifier head:
Detailed 1970s-era SVT appearance
Single channel, entirely solid-state design
Selectable 15 dB input pad
Gain control
Bass, Mid, and Treble controls
Volume control
Selectable Limiter and LED
Peak LED
Auxiliary input
Headphone output
Illuminated power switch
Effects loop with separate send and return jacks
Balanced XLR output
Lightweight switching power supply
Voltage selector switch
MOS-FET power amplifier rated at 200 watts rms into 4 ohms
Fan cooled
Ampeg SVT 210AV speaker cabinet:
Detailed 1970s-era SVT series appearance
Designed as a stack with the Micro-VR amplifier (available separately)
Foot cups on the top panel allow secure stacking of a Micro-VR amplifier or up to four empty shot glasses.
Two ten-inch Eminence speakers
Two 1/4" TS parallel input and output jacks
Nominal impedance 8 ohms
Power handling 200 W RMS
Stylish top handle
Check out the
Ampeg Micro-VR in action in this Ampeg video.
This stack would cost you $900 if bought new. Each component is $300 by itself. Here's your chance to pick up an as new rig for significantly less.
For $700 it's yours. Pick-Up only prefered. 
____________
Amp #2: is an
Acoustic B200 Bass Combo Amp.
I'm asking $199. This amp weighs a ton, so it's definitely pickup only.
I bought this amp new, plugged it in, played it for like 10 minutes and never used it again. I just have too many amps so it doesn't get used. So now it needs to go to a good home.
This amp is brand new, it just doesn't have the packing box it came with. There is not a mark on it. You will not be able to tell it from a new one just taken out of the box. It even has that new Tolex smell!
According to Acoustic, the specs for the B200 are as follows:
Power: 200 Watts @ 4 Ohms
Speaker: 15" Heavy-duty speaker, built-in horn
Channels: 1
EQ: 6-Band EQ - sweepable
Frequency notch filter
Inputs: dual inputs (passive & active)
Outs: XLR direct out
Caster sockets (casters sold separately)
20"W x 24-3/4"H x 15"D
75 lbs.
I also have a set of Ernie Ball casters on it. Why Acoustic doesn't sell these amps with casters is beyond me. The thing weighs 75 pounds! In addition to the casters, I have the original owner's manual and the metal caster surrounds, which I had to take off because the casters wouldn't fit otherwise. But the casters are screwed in tight and work perfectly. It doesn't have a top handle. Why they didn't put on on, I'll never know. It would be so much easier to transport with one. But it does have heavy-duty padded side handles.
This is a brand new, cosmetically and electronically perfect 200 watt bass amp the kicks butt. This thing is loud. It'll definitely enable you to stand out from your Eddie van Halen wannabe guitarist. It has a built-in tweeter than can be turned on or off. This amp was designed for large clubs and live performances. It also works great for practices too.
Again, I'm asking $199 for the Acoustic B200. Pick up only in Westchester County, NY. 
____________
PM me with any questions.
