For sale is a GREAT small pairing for a lightweight, light-duty rig. I just don't have a use for such a small setup with my gigs these days. Why a different city? They're at my parents' place taking up space in the basement and they want that space back now that I've been out of the house many years
$300 $260 for both, not interested in splitting or trades
Local pickup only in STL Portabass 250
The PB250 has been my main amp for many years. It is in good condition, never had an issue with it. Full of great features (see the blurb from the manual below). On the cleaner side of the Ampeg tone, but Ampeg tone still there. Sounded great with both electric and upright. 250W @ 4 ohms, 150W @ 8 ohms.
MDT POWER AMP: Micro Dynamic Technology amplifier circuitry provides maximum power in a small lightweight package -- the efficiency of this design eliminates the need for heavy heat sinks, transformers and filter capacitors
FOUR BAND ROTARY EQ: Four bands of equalization and shift controls for the Low and High Mid provides optimum tone control
ULTRA LOW, ULTRA HIGH SWITCHES: Enhances flexibility and tone control
EFFECTS LOOP: Send and Return jacks are combined with an Effects Blend control for virtually
noise-free use of your favorite effects
TRANSFORMER BALANCED LINE OUTPUT: XLR jack with level control, ground lift, and a pre/post-EQ switch -- for patching into house consoles, mixing boards, or external power amplifiers
SPEAKON® AND 1/4" SPEAKER OUTPUT JACKS: Compatible with either type of connecting cable
MADE WITH PRIDE IN THE U.S.A.
12.5"W x 3.75"H x 10.5"D
14 lbs. Portabass 110
The PB110 was a bought as a back up cab shortly before I started college several years ago, but never used out of the house and was left behind to gather dust. Again, see features below. There are some white marks on the back corners, otherwise clean cab.
Neodymium speaker magnets for greatly reduced weight
Loaded with a 10" speaker and horn
Cab constructed of Italian poplar plywood for combination of resonance and light weight
HF variable L-pad control
200W RMS handling
300W program handling
1/4" and Neutrik Speakon connectors
15"W x 15"H x 12"D