FS : Carvin BR515N Mint! Low Hours - Perfect!

rgee27 · #1 02-12-2010, 11:03 AM

I am selling my BR515N combo that is in mint condition with zero issues. Very low hours of use in living room. Never above 3 on the master volume . Great tone . Light. Versatile. Best value combo on the market for a 500 Watt combo. I am selling to go to a smaller rig due to lack of space in my condo. Pictures on request . Will upload pictures later. Local pickup available!

Updated BX500 head with zero issues. None of the reported issues that are reported here on TB. Works perfectly and sounds awesome.

$535. plus actual shipping cost. Includes Carvin Amp Cover

- RMS 8 Ohms: 300w, RMS 4 Ohms: 500w, RMS 2 Ohms: limited
- 8 ohms Dynamic Peak: 600w
- 4 ohms Dynamic Peak: 1000w
- Output Mode: High Efficiency CLASS D technology
- Power Supply: High Efficiency High Frequency switching
- Frequency Response: +/- 0.5 dB 20 Hz - 20 kHz, +/- 1.5 dB 10Hz - 40 kHz
- THD: 0.1% @ 50% output
- 1% 20-20 kHz @ 90% output
- Damping Factor: >300
- Preamps: Three CLASS A
- Passive/Active Input: 10 dB gain switch - accommodates all basses
- Preamp Tube: 12AX7 switchable in/out
- Bass/Treble: +-10 dB at 100 Hz and +-12 dB at 8k Hz
- Contour control: Flat to -126 dB at 400 600 Hz
- 1 Mid Parametric: +- 10 Db sweepable 100 to 800 Hz
- 2 Mid Parametric: +- 10 Db sweepable 800 to 3k Hz
- Graphic Equalizer: 9 band +- 10 Db @ 63, 120,250,500,1k,2k,4k,8k,16k
- Compressor/Limiter: up to 30 dB - convenient one knob control
- Direct Out: - 50 to +4 dBV adjustable, Balanced 600 ohms
- Effects Loop: -10 dBV In/Out buffered at 10k to keep source constant
- FS22 Footswitch: Graphic EQ on/off, Direct Out MUTE on/off
- Soft Start: gradually turns the amp on to prevent surges
- Speaker Protection: protection circuit immediately disconnects your speakers
- Over-Current: protected, Under-Voltage protected, Thermal protected
- AC Voltage Input: 100-250V 50-60 Hz
- Rack Space: 2U adapter end-plates
- Dimensions: 20.7" wide X 18.5" deep X 23.8" high
- Net Weight: 40 lbs
- Made in San Diego, CA

rgee27 · #2 02-13-2010, 09:42 AM

fourstringbliss · #3 02-26-2010, 02:19 PM

Do you still have this amp? This is what I have been wanting to buy.

rgee27 · #4 02-26-2010, 02:42 PM

Yes, still have it for sale. I've been away on vacation so I haven't been actively pushing the sale. It sounds great and works perfectly. It is the latest version head in original style cab.

fourstringbliss · #5 02-26-2010, 02:43 PM

Quote:

Originally Posted by rgee27

Yes, still have it for sale. I've been away on vacation so I haven't been actively pushing the sale. It sounds great and works perfectly. It is the latest version head in original style cab.

Great! What would be the total with shipping to Renton, WA 98055?

rgee27 · #6 02-26-2010, 02:55 PM

I will be back home Saturday night. I will work it out for you then. I can work out an estimate until then. I would think about $50 or so because of size and weight. Thanks. Richard

fourstringbliss · #7 02-26-2010, 03:03 PM

Quote:

Originally Posted by rgee27

I will be back home Saturday night. I will work it out for you then. I can work out an estimate until then. I would think about $50 or so because of size and weight. Thanks. Richard

That sounds great! I could definitely do $50 shipping, but it's cool if it's more (because of the size and weight).