FS Carvin BRN610 cab only

Envincibal · #1 12-09-2009, 09:41 AM

CORRECTION: I have a Carvin BRN510N NOT BRN610 cab that I am selling: this is ony for the 2x10 (+tweet) enclosure (the head is NOT included). Just add your own 2-space head and you've got a combo that can handle 600 watts. I would say that as a stand alone cab, it would resemble (in tech specs) the BR210N-4 or BR210N-8 (I don't know the ohms of the cab), and is proabably about 42 lbs, plus the cab can be used as a tilt-back'.

Here is the link for the combo:
http://www.carvinguitars.com/product...product=BR510N

It will ship in the original box from Carvin.
I'm not sure of the OHMs because its not listed on the back of the cab. The cab is in near mint condition (one marking on the cab - I'll try to get a pic up later tonight).

The 2x10 was originall bought for practice, but I've taken a liking to 12's moreso and so this one needs to go.

Lets say... $235 + shipping
thanks!

Rapisme · #2 12-11-2009, 08:21 PM

Any interest in Trades.. I have 212's

Envincibal · #3 12-12-2009, 01:42 PM

PMs replied... I might be interested in a 212... details please

Envincibal · #4 12-14-2009, 05:23 PM

I opened the cab up to look at the drivers, and they had the following label:
Neo Series NE10-4
D081010101
I am assuming these are the 4 OHM drivers

Envincibal · #5 12-23-2009, 07:39 AM

PMs responded to. Make an offer.

Envincibal · #6 12-28-2009, 05:37 AM

Cab only - no head

Envincibal · #7 12-29-2009, 10:57 AM

For those who have asked about the space available for another amp/head:
19" wide
14" from the front of your rack (faceplate) to the very back of the cab - however, the cab has a slant to it, so the actually amount of space where your amp/head is covered by the enclosure is about 12.5"
thanks