FS: CARVIN BX500 **SOLD**

[larrison]

***SOLD*** Selling my beloved Carvin BX 500. I bought it new and have had it a little over 9 months. It is like new and has never had any issues whatsoever. It's a fantastic light weight amp with lots of power. I have a new Carvin amp here now and need to sell this one! I am including the rackmount plate ($30 value). $350 shipped CONUS. PAYPAL OK.

- Output Power: 8 Ohms: 300wRMS, 4 Ohms: 500wRMS, 2 Ohms: limited at 500wRMS
- 8 ohms Dynamic Peak: 600w
- 4 ohms Dynamic Peak: 1000w
- Input Impedance: >200Kohms
- Output Mode: High Efficiency CLASS D technology
- Power Supply: High Efficiency High Frequency switching
- Frequency Response: +/- 1 dB 10 Hz - 20 kHz - THD: 0.1% @ 50% output
- 1% 20-20 kHz @ 90% output
- Damping Factor: >300
- Preamp: 3 stage CLASS A
- Passive/Active Input: 10 dB gain switch - accommodates all basses
- Preamp Tube: 12AX7 switchable in/out
- Bass/Treble: +/-12 dB at 60 Hz and +/-12 dB at 8kHz
- Contour control: Flat to -15 dB at 500 Hz
- 1 Low Mid Parametric: +/- 12 dB sweepable 50 to 500 Hz
- 2 Hi Mid Parametric: +/- 12 dB sweepable 200 to 2kHz
- Graphic Equalizer: 9 band +/- 10 dB @ 50,80,125,250,500,800,1.3k,2.6k,5k
- Compressor/Limiter: up to 3:1 compression ratio. convenient one knob control
- Direct Out: -50 to +4 dBu adjustable, DC isolated XLR output
- Effects Loop: -10dBV, buffered
- FS22 Footswitch: Graphic EQ on/off, MUTE on/off
- Soft Start: gradually turns on the amp to prevent surges
- Speaker Protection: protection circuit immediately disconnects your speakers
- Over-Current: protected, Under-Voltage protected, Thermal protected
- AC Voltage Input: 90-250V, 50-60 Hz
- Rack Mount: optional 2U faceplate BX500RP
- Dimensions: 71mm (2.8") high, 230mm (9") deep, 356mm (14") wide
- Net Weight: 2.3 kg (5.0 lbs)
- Made in San Diego, CA

[jeremyr]

PM sent

Also does it come with a warranty from carvin?

[larrison]

**SOLD**