FS FEELER: svp-pro, dbx-160a, world 2.1 stack
I have a four rack space rack. In it is an ampeg svp-pro preamp, a dbx 160a compressor, and a stewart world 2.1 power amp. If you aren't familiar with this equipment, please google them. This system can easily drive two 8x10 cabinets and give the real svt sound in a package weighing around 40 lbs.
I also have an eden 410t and an eden 215 still with original tags. Both cabinets are 4 ohms and weigh about 90 lbs each. This makes for an extroirdinary big stack. This works because the world 2.1 is actually two independent power amps in one 23 lb, 2 rack space unit. If i wanted to bi-amp this rig, i would substitute an alembic sf-1 for the svp-pro. In fact, i had an sf-1 and like the svp-pro's ampeg sound better.
This entire rig is pristine. I am the original owner of everything except the svp-pro. The svp-pro was retubed right before i bought it and is silent. I live in MD and prefer not to ship the cabs.
I had back surgery six months ago, so i don't expect to be carrying this rig anytime soon, but it will be hard to let any of this stuff go.
I do not want to break up the stack. This is a feeler to find the value of this rig.
Thanks in advance for your help,
Last edited by sensei_steve : 07-21-2013 at 12:41 AM.
Reason: i do not understand the purpose of "feeler." i am a supporting member. this is rare vintage equipment. i am solicting help in evaluating this stuff. is this not the purpose of a feeler?