FS/FT Feeler: Ampeg BXT210M/BXT115HL4/Genz Benz GBE400 Chicago
Sign in to disble this ad
FS/FT Feeler: Ampeg BXT210M/BXT115HL4/Genz Benz GBE400
To make it simple....350 each obo.
Looking to possibly scale down to a combo so i'm listing the rig here for sale or trade.
Trade I'd really like would be a Mesa M6 Carbine combo 2x12
Shipping for the cabs would be outrageous, so i think local Chicago area would be best. The amp is light enough so i will ship that. If you want the fender rack tuner and 4 space SKB rack, throw in another 100.
Bought the 210 Brand new in 2007 after I acquired the 115, then grabbed the GBE 400 to go with. Rig has been gigged but is in good shape.
Will try and post some better pics
Ampeg BXT 210M (4ohm) TECHNICAL SPECIFICATIONS:
TYPE 2x10 Bass Monitor Cabinet
FREQ RESPONSE (+/-3dB) 45Hz 18kHz
USABLE LOW FREQ (-10dB) 38Hz 35Hz
RMS POWER HANDLING 400 watts
PEAK POWER HANDLING 800 watts
IMPEDANCE 4 ohms
SENSITIVITY 99dB SPL 1w/1m
MAXIMUM SPL 119dB
COMPONENTS 1 10 cast frame full range w/2-1/2 dia edge-wound
aluminum voice coil
1 10 cast frame coaxial w/edge-wound aluminum
voice coil
1 1 phenolic dome 10 oz HF driver
CROSSOVER FREQUENCY 5kHz
DIMENSIONS (H x W x D) 15-1/2 x 23 x 17-3/4
WEIGHT 61 lbs.
Ampeg BXT115HL TECHNICAL SPECIFICATIONS:
BXE-115HL4
TYPE 1x15 Bass Enclosure
FREQ RESPONSE (+/-3dB) 42Hz 18kHz
USABLE LOW FREQ (-10dB) 37Hz
RMS POWER HANDLING 300 watts
PEAK POWER HANDLING 600 watts
IMPEDANCE 4 ohms
SENSITIVITY 99dB SPL 1w/1m
MAXIMUM SPL 125dB
COMPONENTS 1 heavy duty 15
cast frame speaker
4 voice coil, 109 oz
magnet
1 hf horn/driver
DIMENSIONS (H x W x D) 23 x 26 x 19
WEIGHT 105 lbs. Genz Benz GBE400
FEATURES
Active/Passive Input Stage
Signal Mute Switch
Tuner Out
Input Status LED
All Solid State Design
Shape Circuits - L.F. Extend; Mid Scoop; H.F. Attack
Five Band Active EQ (Same Circuit as the GBE 600)
Front Panel Status LED Display
Master Volume Control
Unique Soft Limit Circuit
XLR Direct Out with Level Control; Pre/Post Switch; Ground Lift Switch
Effects Loop
Dual Speakonฎ and 1/4" Speaker Outputs
High Efficiency Fan Cooling
Power Output 200 W/330 W/450 W 8 ohm/4ohm/2ohm
Preamp Type FET
Weight Lbs. 23
Dimensions HxWxD 3 1/2" x 19" x 14 1/2"
Last edited by robertusf : 11-27-2011 at 04:44 PM.
|