| FS: Markbass Little Mark II
*****SOLD***** Just got this cool class D micro head. My impression is that Markbass kinds kicked off the micro-craze but I could be wrong. Anyhow, I got this in a trade deal and it sounds great. The VPF filter reminds me of my old Eden Wt-300 enhance knob a little bit but with more wetness if that makes sense.
OK how about I ship it to you for $400.00?
Because I know how fun it is to shop here are all the answers to your questions:
It does not fit in a Mono M80 single-wide gigbag.
Features
Solid state preamp analog bass head
Provides 300W RMS at 8 ohms, 500W RMS at 4 ohms
1/4" input jack works with active or passive basses
Balanced XLR on front for double bass pickups
Gain and Master volume controls
Clip warning light
EQ includes controls for Low, Mid Low, MId High, and High
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
Balanced XLR out
Ground lift switch to eliminate hum
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
Effect Send and Return maintain signal even when effects fail
Dual-sided fiberglass PC boards with lined perforations for high-quality solder connections
Surface-mount components are silicon-sealed to isolate vibrations
Computer-grade pre-assembled ribbon connector cable harnesses and ribbons for noise-free operation
Integrated threaded posts for easy assembly/disassembly and added durability
SPECS
Power
Input impedance: 500Kohm, max. voltage: 15 Vpp
Balanced Output (XLR): 22Kohm, max. voltage 25 Vpp
Effect Return impedance: 22Kohm, max. voltage: 25 Vpp
Output Power: 300W RMS at 8 ohm, 500W RMS at 4 ohm
Voltage is factory preset for the U.S.
Controls
GAIN —80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT: switch on rear panel
Equalization
LOW
Center frequency: 40Hz; level ±16dB
LOW MID
Center frequency 360Hz, level ±16dB
HIGH MID
Center frequency 800Hz, level ±16dB
HIGH
10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
center frequency 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250Hz—20kHz (cut)
Outputs
EFFECT SEND
Unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
Unbalanced, max. voltage 25 Vpp
LINE OUT
Balanced XLR, max. voltage 10 Vpp
SPEAKER OUT
Speakon, 1/4"
Other
Dimensions: 10.87"W x 2.8"H x 10.1"D
Weight: 6.39 lbs.
Last edited by lax4bags : 05-15-2013 at 09:33 AM.
Reason: SOLD
| 
