|  | 
07-27-2008, 11:50 AM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | FS, maybe FT: QSC RMX 1850HD
Sign in to disble this ad
Greetings!
Just got this on a smokin' deal on eBay, but in the mean time, I also picked up a couple of QSC PLX's to finish out my FOH rack. So the heavy one has gotta go!
It's a QSC RMX1850HD. The HD stands for "Heavy Duty", so designated by QSC for it's ability to run cool at long-term 2-ohm loads. Here a link to the specs from the QSC site: http://www.qscaudio.com/products/amps/rmx/rmx.htm
The short list: 350/550/900W/channel at 8/4/2 ohms Stereo; 1100/1800 at 8/4 ohms Bridged mono.
Weighs 44.5 pounds.
One of the REAR rack ears was damaged in shipping to me, but the amp functions fine. I straightened it out as best I could, but some of the powder-coated paint has popped off. Just a shot of flat-black Krylon to take care of any future oxidation/rust, and you're good to go (I haven't yet, in the interest of disclosure).
Looks like these are going in the $350-400 range plus shipping on eBay, so I'll take the low end and say LOWER PRICE -- $345 SHIPPED CONUS. Ad won't stay here long, as I've got the other PLXs to pay for. IT'll go to the 'Bay in less than a week if no action here.
Just got back from vacation, so I've got a ton of stuff to do today. Pix up ASAP, but it'll prolly be tomorrow night.
I won't rule out bass trades, but it'll have to be something interesting or in my favor. Probably no cabs or amp trades -- got an Eden out on the 'Bay right now. But you never know........
Thanks!
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
Last edited by dcr : 08-03-2008 at 12:25 PM.
| 
07-28-2008, 02:45 PM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | No love for a QSC amp? Hmmm.....may have to go to the 'Bay. I'll give it a few more days here, then off she goes.
Don't like my price? Make me an offer!
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| 
07-29-2008, 09:21 AM
| | Registered User | | Join Date: Jan 2003 Location: Fort Worth -- that's my hood. | | | Bump for a very good amp.
__________________ Be you; do what you do... Keep the Groove. Currently creating low frequency vibrations with the aid of EBMM SR5, EA iAmp-600, & EA CX-310. | 
08-03-2008, 12:24 PM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | One last time...$345 shipped CONUS
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| 
05-16-2009, 11:06 AM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | Back from the dead BUMP!
Picked up a micro head a few days ago, and it's taking the place of one of my big rigs, so I've got another spare amp besides this one. The heavy one's OUTTA HERE!
I gotta pull this amp outta my FOH rack to take pix, but I'm working 7 days this week. May take a couple of days for fresh pix. But it looks like a QSC RMX1850HD with a bent REAR rack ear and chipped paint.
Amp works great and has been pulling monitor A/B duty since I put one of my QSC PLXs in the shop.
Really not interested in trades, but I would consider trade for an Epifani T-112 or UL-112.
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| 
05-16-2009, 12:10 PM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | Trade update:
Besides the Epi cabs mentioned in the ad text, I'd certainly think about other small mid-grade 8-ohm cabs (Aggie, Dr. Bass, LDS, Avatar, etc.). Prefer 12" with mids driver/horn but I'd consider 2x10s as well.
Would think about a small digital recorder in trade too!
As always, cash +/- for the right deal.
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
Last edited by dcr : 05-17-2009 at 10:29 AM.
| 
05-30-2009, 10:08 AM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | Pix up later today
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| 
06-27-2009, 09:26 AM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | Forgot about this ad. Amp set up from last gig.
Somebody make me an offer!
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| 
06-28-2009, 10:00 AM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | | Okay, so how's this --- $285 plus shipping ANYWHERE!
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| 
06-28-2009, 10:02 AM
|  | Registered User | | Join Date: Jun 2004 Location: L.A., as in Lower Arkansas! | | Quote:
Originally Posted by dcr Greetings!
Just got this on a smokin' deal on eBay, but in the mean time, I also picked up a couple of QSC PLX's to finish out my FOH rack. So the heavy one has gotta go!
It's a QSC RMX1850HD. The HD stands for "Heavy Duty", so designated by QSC for it's ability to run cool at long-term 2-ohm loads. Here a link to the specs from the QSC site: http://www.qscaudio.com/products/amps/rmx/rmx.htm
The short list: 350/550/900W/channel at 8/4/2 ohms Stereo; 1100/1800 at 8/4 ohms Bridged mono.
Weighs 44.5 pounds.
One of the REAR rack ears was damaged in shipping to me, but the amp functions fine. I straightened it out as best I could, but some of the powder-coated paint has popped off. Just a shot of flat-black Krylon to take care of any future oxidation/rust, and you're good to go (I haven't yet, in the interest of disclosure).
Looks like these are going in the $350-400 range plus shipping on eBay, so I'll take the low end and say LOWERED PRICE -- $285 plus SHIPPING ANYWHERE ON YOUR DIME. Ad won't stay here long, as I've got the other PLXs to pay for. IT'll go to the 'Bay in less than a week if no action here.
Just got back from vacation, so I've got a ton of stuff to do today. Pix up ASAP, but it'll prolly be tomorrow night.
I won't rule out bass trades, but it'll have to be something interesting or in my favor. Probably no cabs or amp trades -- got an Eden out on the 'Bay right now. But you never know........
Thanks!
dcr | Can't EDIT the OP
dcr
__________________
"...You can't please everyone, so you got to please yourself." --- Ricky Nelson
**************************************************
Roscoe / Nordy / Markbass / Epifani
| | Thread Tools | Search this Thread | | | |
Posting Rules
| You may not post new threads You may not post replies You may not post attachments You may not edit your posts HTML code is Off | | | |