FS: Tecamp BAD BULL 2100 watts

[darkbass]

Gently used on 1 major tour. Handled by professional techs and shipped in heavy duty cases for its entire life. Will ship international!

Seeking $2399 + shipping

1 - Bad Bull - New - excellent condition

The TecAmp Bad Bull is a bass amplifier top with a power output of 2100 Watt, weighing only 11 kg. The TecAmp Bad Bull is equipped with an all-tube preamp and a switchable power stage tube to add the some tube saturation. Input and output level of the TecAmp Bad Bull are shown by two so called Magic Eyes. The TecAmp Bad Bull's tone control consists of a 6-band choke EQ, in addition there is an adjustable tube compressor. The power of the TecAmp Bad Bull is delivered via 6 Speakon outputs to the speakers. A switchable crossover for channels A and B with frequency control lets you, for example, use an additional cabinet as a pure subwoofer or use the TecAmp Bad Bull as a bi-amping system. Furthermore, the TecAmp Bad Bull is features two separate effects loops and a transformer balanced DI out with pre/post and reversed phase switch.
Tecamp Bad Bull:
Bass amplifier top with tube preamp
Power output: 2 x 1050 Watt (8 Ohm), 2100 Watt (4 Ohm)
Tube preamp: 1 x 12AX7, 2 x 12AT7
Power stage: class D with switchable EL84 tube
6-band choke EQ: sub, bass, lo mid ,mid, hi mid, high
Tube compressor with ratio and treshold controls
2 effect loops
Inputs: high, low, 2 x power amp in
Outputs: 6 x speakon, power tube out, tuner out, line out, DI out
Dimensions: 60 x 27 x 23 cm
Weight: 11 kg

[Zentner]

SERIOUS.

[darkbass]

Preamp: tube preamp, 1 x 12AX7, 2 x 12AT7
Optical Control: magic eye tubes, 1 x input, 1 x output power
Output RMS: 2 x 1.050 w (8 ohms), 1 x 2.100 (16 ohms)
Power Section: digital power amp with seperate vol. control for CH-A and CH-B with seperate switchable X-over for each channel and switchable bridged mode option + EL84 power amp tube
Transformers:
switching power supply, toroidal for tube pre- and tube power amp
EQ Section: 6-band choke equalizer with sub, bass, lo mid, mid, hi mid, high controls
Compressor: tube compressor with ratio- and threshold controls
Effects Loop 1: fx loop parallel/serial operation with mix control, -10dB send pad, switchable high pass filter
Effects Loop 2: fx loop serial operation
Inputs: two 1/4” input jack, 1 x hi, 1 x lo; two power amp in 1/4” jack, 1 x CH-A, 1 x CH-B
Outputs: six Neutrik Speakon® outputs, one 4 w power tube output 1/4” jack, tuner out, line out, transformer balanced XLR DI out with pre/post and reversed phase switch
Cooling: high quality temperature controlled fan
Power Req.: 100, 120, 230 VAC 50-60 Hz
Rack Size: 24” (W) x 11” (D) x 9” (H)
Dimensions: (W x H x D):
60 cm x 23 cm x 27 cm / 23.7" x 9.1" x 10.7"
WEIGHT: 11 kg / 24.25 lbs

[monsterthompson]

i wish.

[jbares]

Bet this amp sounds incredible...I love my tecamp 900....bump

[monsterthompson]

i srsly wish i could justify the cash outlay.

[darkbass]

$2000

[LowBSix]

If it had 3000 watts, I could count on some headroom. Oh well....
Christmas bump with a smile!!!

[darkbass]

Back up to $2250

[darkbass]

One more 24 hour sale


$2k

[darkbass]

Sale over Bump