FT/S Feeler - Dr. Bass Doctor Bass 3080 cabinet

rpsands · #1 07-30-2009, 09:50 PM

900 watts, neo, 4 ohms, about 70lbs - and it'll actually take all 900 of those watts!

I helped design this cabinet and to my knowledge it's the only one. It's a fantastic, super loud cabinet that goes ridiculously low as well. It's got better mids than most bass cabs available and is super portable despite its large size - I can carry it up and down a flight of stairs on my own without too much difficulty and have many times. It's about 70lbs and has a dolly handle and tilt back casters.

There were a couple issues with it when I got it: One of the wheels and the top handle were sealed poorly, so I caulked them up and it's good as new. Also, it was missing a cross brace, which I installed per Marc's instructions. It's extremely sturdy and well constructed save for those oversights.

It's got two 3015LFs with a 900 watt crossover, an Alpha 8 MRA midrange, and a Selenium tweeter. The crossover point is 1200hz, but I do not know the slopes if you're curious about that you can email Marc! I believe it to be 12db down / 18db up. It's tuned to around 42hz, according to Marc.

I have gigged this once and it filled out the stage volume and backed up the PA pretty well for an outdoor gig. I didn't push it terribly hard, but I have turned it up quite loud. The 3015LFs really kick!

I've just downsized my rig quite a lot and found that one 3015LF cabinet is enough for me in most all gigs and if not we tend to have PA support. It's just more cabinet than I need and I'd like to finance building another fEarful to match my smaller one.

650 cash + shipping. I highly recommend someone within driving distance of Phoenix pick this bad boy up as it is super expensive to ship! I will have to build my own box for it and I'd anticipate around 100 bucks shipping.

I'd be willing to deal trades, pretty flexible gear wise.

Update: FYI, if someone has a fEarful and for some reason wants to trade, I'd be down to trade this for your fEarful + 100 bucks Will drive up to Los Angeles area for swaps.

Other trade items I like (+ or - cash)
Carvin BX1200
Any quality preamp with semi-parametric eq
Composite neck basses
American P/J basses
Euphonic Audio Wizzy cabinets or combos
Tecamp Puma 1000
EA IAmp pro

Hell throw anything at me! I'm always into trying out new stuff.

Jazzdogg · #2 07-30-2009, 10:30 PM

Which of these specs pertain to your cab?

1200 watts RMS Ceramic
900 watts RMS Neo
2x15, 8" mid w/horn
3-way X-over w/ mid and HF level control
37Hz to 20Khz
102 dB 1W1M
4 or 8 ohms
37"h x 23"w x 17.5"d
89 lbs. Ceramic
63 lbs. Neodymium

rpsands · #3 07-30-2009, 10:41 PM

Sorry:

900 watts, neo, 4 ohms, closer to 70lbs I think.

alembic5 · #4 08-02-2009, 03:57 PM

Wow... 2 3015LF's must be brutal. I'd love to try this one out! Bump for a killer cab.

rpsands · #5 08-03-2009, 12:50 PM

Thanks man

If I've still got it and you get down to Phoenix you're more than welcome to check it out, especially given your awesome taste in gear :>

It's really an amazing replacement for someone who would normally use an 8x10 weighing twice as much. It is easily louder than any 8x10 I have ever seen and if stretched I can pick it up with one hand for brief amounts of time.

60bass · #6 08-04-2009, 12:49 AM

rpsands · #7 08-04-2009, 10:49 AM

Back atcha man! Thanks for the interest.

rpsands · #8 08-06-2009, 10:32 AM

Le Bumps

coolrunner989 · #9 08-06-2009, 10:39 AM

What are the dimensions? Particularly depth...

rpsands · #10 08-06-2009, 11:01 AM

It's 23.5" wide by about 35.5" tall (I think closer to 37" with the feet) by 17.5" deep.

coolrunner989 · #11 08-06-2009, 11:03 AM

Darn. I need something that's a little bit shallower to fit in the bed of my truck with the lid down. Best of luck with the sale for you, I'm sure this sounds great.

basspro · #12 08-06-2009, 02:50 PM

PM sent

rpsands · #13 08-08-2009, 01:06 PM

Barump.

HaPpYfAcE · #14 08-08-2009, 01:33 PM

would meeting in albuquerque be an option? i wonder if shipping would offset the cost in fuel, etc. still thinking about my next cab purchase, but it would be good to know where you're willing to go.

rpsands · #15 08-08-2009, 02:25 PM

The cost of time is more the issue, but NM is out of my league. It's about 60 bucks in just gas not to mention time.

I estimate 80 bucks to ship so probably better just to ship at that distance which I'm more than willing to do for cash.

A six hour drive is about my limit - something I can do in an a single saturday if I leave early.

Standalone · #16 08-09-2009, 03:38 PM

hot dang.

rpsands · #17 08-10-2009, 11:26 AM

To the top top.

73jbass · #18 08-10-2009, 01:25 PM

What is the cab covered with?

rpsands · #19 08-10-2009, 02:12 PM

It's line-x like hard coating, commonly referred to as "bedliner" or what have you, like all Dr. Bass cabinets.

73jbass · #20 08-11-2009, 10:13 AM

PM sent.