Glockenklang onboard pre-amp 3 band

jazz3625tonic · #1 08-22-2009, 01:02 PM

I took this out of a Curbow IEP 6 string bass that I picked up used a few weeks ago. This is a very nice sounding pre-amp. When set flat you can not hear the diference between active and passive. Very well defined and warm. It is in perfect working order and the "only" reason I'm selling it is because I will be installing the correct Bart pre that Greg Curbow had installed in the IEP. The person that owned the bass before me replaced the Bart pre with the Glockenklang.
I'll ship it free in the lower 48 States for $80.00. And just to let you know it was wired to a 18 volt power supply. It's all pre wired except for the input jack and power supply that you will have to provide. Thanks!

fruitlabor · #2 08-22-2009, 02:24 PM

fruitlabor · #3 08-22-2009, 02:25 PM

How long are the wires coming from the pre and do you have knobs and washer and nuts?

jazz3625tonic · #4 08-22-2009, 03:30 PM

PM's replied. To clear things up: I'm keeping the knobs for the new Bart pre I'm getting to replace this one. The washers and nuts are on the posts and come with the preamp. The only wires I cut were the pup wires and I cut them at the pre. The I cut the wires close to the jack. I do not have a wiring diagram for this and although it was wired to a 18 volt power supply with the Curbow, Glockenklang sells them as a 9 volt. The original owner of the Curbow IEP must of had his tech configure it to 18 volts.

Dan Knowlton · #5 08-22-2009, 07:52 PM

PM sent.

Dan K.

jazz3625tonic · #6 08-23-2009, 07:43 AM

PM's replied.

jazz3625tonic · #7 08-23-2009, 04:29 PM

SOLD to lowlife6 pending payment.