I am in the process of doing some downsizing, so for your consideration is a
Markbass CMD 102P Combo. This is an amazing amp and remarkably lightweight, but I am moving to a single rig. The Markbass is in great shape. Near new condition (I reserve the word mint for gear that still smells like the store) without any issues. I will include a custom heady-duty vinyl cover and Markbass Bass Keeper Strap (
http://www.guitarcenter.com/Markbass...33-i1402823.gc), which works well for most basses.
Here are the details:
Markbass CMD 102P 300/500W 2x10 Tilt-Back Bass Combo Amp Features:
Solid state Little Mark II preamp buit-in to the front
2 10" B&C neodynium speakers
Piezo tweeter
Made of high-grade, multi-ply poplar
Glued, screwed, and sealed internally with special compounds for maximum sound quality
Lightweight
Angled cabinet design so it can be used either as a floor monitor or vertically
Grill screen to protect speakers
Little Mark II
Provides 500W at 4 ohm or 300W at 8 ohm
Gain and Master volume controls
Clip warning light
EQ includes controls for Low, Mid Frequency Low, High Frequency Low, and High
VLE (Vintage Loudspeaker Emulator) and VPF (Variable Pre-shape Filter) filters
Neutrik Speakon Combo out jacks for use with 1/4" or Speakon speaker cables
Balanced XLR out
Ground lift switch to eliminate hum
Tuner out sends unbalanced signal sent to a tuner, amp or recording equipment not needing a balanced signal
Send and Return Effect ensures main signal continues even if something dies in your effects chain
Markbass CMD 102P 300/500W 2x10 Tilt-Back Bass Combo Amp Specifications:
Speaker: 2 x 10"
Tweeter: piezo
Bass port: front
Impedance: 8 ohms
Sensitivity: 101 dB SPL
Speaker power handling: 400W RMS (AES Standard)
Frequency response: 40Hz to 18kHz
Crossover frequency: 3kHz
Dimensions: 18.9"(W) x 23.4"(H) x 18.7"(D)
Weight: 44 lbs.
Controls
GAIN 80 dB to +23 dB range
MASTER VOLUME
GROUND LIFT: switch on rear panel
Equalization
LOW
Center frequency: 40Hz; level ±16dB
LOW MID
Center frequency 360Hz, level ±16dB
HIGH MID
Center frequency 800Hz, level ±16dB
HIGH
10kHz shelf; level ±16dB
VPF (Variable Pre-shape Filter)
center frequency 380Hz (cut)
VLE (Vintage Loudspeaker Emulator)
frequency range 250Hz 20kHz (cut)
Outputs
EFFECT SEND
Unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT
Unbalanced, max. voltage 25 Vpp
LINE OUT
Balanced XLR, max. voltage 10 Vpp
SPEAKER OUT
Speakon, 1/4"
$850 shipped.
The attached image is stock. I will post real pics ASAP. Please PM me with questions, offers or for specific pics of the amp. Thanks.
Markbass CMD 102P 2x10 Combo with Cover...$850 Shipped 
.
