Listing this cheap as I've got my eye on something - if that item sells, this is off the market.
Amp is prestine for its age and sounds/works great! Very loud, and very deep. The mid scoop, compressor and chorus are awesome features. Also has dual inputs! Includes footswitch and manual!
Author/Mfg.: Fender
Title/Item: Fender BXR 200 Bass Amp
Condition: Used - Good Condition - No Defects
Type: 200 Watts Solid State
Seller ID: LCDFenderBXR1
POWER AMPLIFIER SECTION:
Power output: 200W R.M.S.
Rated load impedance: 4 ½
Distortion at 200 watts: Less than .1% @ 1 kHz, below compression
Less than 1% @ 1 kHz, maximum compression
Sensitivity: 1.03V R.M.S.
Input impedance: 22 k½
DELTACOMP (tm) range: 20 dB
PREAMP SECTION:
Input impedance: Input 1 - Greater than 420 k½ (typically greater than 1 M½ in the passband)
Input 2 - 136 k½
Sensitivity for 200 W: Input 1 - 2.2 mV GAIN at maximum, all Input 2 - 4.4 mV tone controls at “0” detent, no enhancement activated.
Shelving tone controls: LOW +/- 12 dB at 60 Hz HIGH +/- 12 dB at 10 kHz
Graphic equalizer: +/- 12 dB at 80, 140, 250, 450, 800, 1.4k, 2.5k, 4.5k, and 8 kHz.
PHYSICAL SPECIFICATIONS:
BXR 200 COMBO
Height: 25-1/2 inches (64.8 cm)
Width: 21-1/2 inches (54.6 cm)
Depth: 13-1/2 inches (34.3 cm)
Weight: 72 lbs. (32.7 kg)
Speaker: 15” 4 Ohm Fender Special Design
Controls (left to right): Bass Boost, Mid Cut, Treb Boost, Gain, Shelving (low and high), 9 band EQ, Chorus rate and depth, Compressor.
$200 local sale only.