| SA500 MoMark modular bass head.
Sign in to disble this ad
SOLD! SA500 MoMark modular bass head. Include 500W Amp Frame, S1M module, EQ42S EQ module, MVVL master module. $550.00 shipped.
2010 Momark SA500
Bass amplifier. Excellent condition. Simply used as a backup in studio setting to rehearse inhouse. Just as near new as possible.. All specs are available online for the SA500..Great piece from Markbass.
MoMark 500W Analog Bass Frame
Powered by state-of-the-art technology, the Markbass MoMark is a system based on a modular design, giving bassists the freedom to choose the specs and features they want and need. First you choose your power amp, which is housed in a light, compact, black ABS plastic chassis. Then you choose between various options of preamp, EQ, and master modules. The three modules you choose simply slide into the front of the bass amp chassis. The options and combinations are limited only by the imagination: possibilities range from bare-bones designs (with only Gain and Master controls, for example) to a wide range of elaborate features and the amount of tonal control you need. Best of all, if and when your needs ever change, you don't need to buy a whole new bass amp: you simply buy a new module. The MoMark amplifier frame contains your power amp, empty slots for your preamp, EQ, and master modules, and rear panel jacks for connecting your amp to the speaker cabinets, external effects, and a soundboard. Supplying 500W, the power of this frame is suitable for all kinds of gigs, from small clubs to larger stages. The sound is clear, fast, and warm. With this amp, you get the same power and sound that brought widespread international success to all the 500W analog Markbass heads. All amp frames include two combo Speakon 1/4" speaker jacks, effects loop (parallel), XLR DI out with pre/post EQ switch, ground lift, and tuner out.
T1M Tube Preamp
The T1M is a tube preamp module for the MoMark system. Thanks to the tube's huge gain section, the T1 preamp module has a warm and full sound that doesn't cloud the instrument's tone but glorifies its harmonics, reproducing every detail with exceptional definition. It's perfect for anyone who wants tube warmth without distortion. The mute switch allows you to tune in silence when a tuner is connected to the tuner output and also allows you to change instruments without unplugging your cable.
EQ42S EQ Module
The MoMark EQ42S Bass Amp Module features 4 bands of equalization and 2 semi-parametric controls which allow you to choose the frequencies in the mid-low and mid-high range that you want to boost or cut. These controls compensate for bad venue acoustics, optimize your place in the mix with the other instruments, or reduce feedback from acoustic instruments like the double bass. The frequencies that you can cut or boost have been carefully selected to be practical, and all tweaks are audible--only small adjustments are needed to control punch, attack, and definition to suit your personal needs and tastes.
MVVL Master Module
The Markbass MoMrak MVVL Bass Amp Module sports a line-out level control, in addition to the basic volume control. Now you can manage the amount of signal sent to the mixer or recording device through the balanced XLR line out. There are also 2 filters: the VLE (Vintage Loudspeaker Emulator) and the VPF (Variable Preshape Filter). These handy controls access a wide range of timbres, from vintage tones to modern hi-fi sounds. Many bassists find that these 2 filters are a practical solution for changing their sound in a simple and musical way, without fiddling with EQ controls. The bi-band limiter--which gives you faster response than traditional limiters--is more dynamic, especially when playing at high volumes.
__________________
Keepin it smooth and steady,."I don't think I have ever met a single person who isn't moved by music of some kind."
Last edited by Rapisme : 08-20-2011 at 10:21 PM.
| 
