Got some parts for a project that fell-thru. Bundled for a quick sale, as I have some big recording bills to cover (hence my bass & cab for sale in my sig.) Buy the bridge, cables, and J pups for $90 shipped, and get the EMG pups free! (Otherwise, they're $50 shipped.)
Older EMG Precision pups with solderless connect
to the pups but the other ends require soldering. Battery term is soldered, but not the lead and grounds. I have 1 25k pot I pulled from my Blackout guitar, with an orange sprague tone cap and a stereo jack from a kit.. So you'd just need one more 25k pot for volume and a stereo out jack
. Here's a site with good prices: http://www.tubesandmore.com/search/node/cts%2Bpots
I will also include two aluminum battery holders, but I only have a total of 6 screws and 4 springs for all the pups. Pair of MIM jazz pups
, plenty of original leads and nice-wear on the case and magnets. Both 92mm long. I also have 2 white covers
I sanded the gloss off but alas they won't "age" with tea, but I hear brown shoe polish will def. work. The 95mm one's holes align with the MIM pups, but the 92mm one strangely doesn't. I got them here: http://cgi.ebay.com/ws/eBayISAPI.dll...E:L:OU:US:3160
. I also have two cool off-white knobs
with thread-screws from here: http://www.ebay.com/itm/140986555596...84.m1439.l2649
And two cream P-bass covers too!
. And if you don't want to do a P&J configuration and instead load just a J bass, included is a stacked vol pot and tone pot
with cap from an MIJ Charvel.
Next is an ABM-type chrome? high-mass bridge
--looks very close--that sells for $216 new here http://www.allparts.com/BB-0320-010-...dge_p_552.html
. Includes screws and allen wrench.
Finally, I have 4 1' colored patch cables
, 1 1' tweed, and 1 9" black ProCo, ALL angled ends.
More pics in subsequent posts.