Digitech BP8 Multi-Effects Processor with manual and power supply.
http://www.talkbass.com/reviews/show...hp?product=381
Price $150 OBO plus $20 shipping lower 48. UPS ground. Paypal
The BP8 is DigiTech's first preamp/processor dedicated exclusively for the bassist. Don't let its compact size fool you, the BP8 delivers professional quality sounds unlike any of the other floor bass processors. A full function compressor, tube and solid state preamp, 4 band EQ and selectable notch filter provide all the control you need for virtually any bass sound imaginable. Add to this the myriad of studio quality effects DigiTech is famous for and you have all you need in a rugged road-worthy design. Give the BP8 a listen and find out the easiest way to expand your current bass rig.
The BP8 was crafted with the same attention to detail as DigiTech's top-ranked guitar processors, and is capable of delivering the highest-quality professional bass tones available. A fully-programmable analog compressor, choice of 12AX7 tube or solid state preamps, four-band EQ with two sweepable mids and adjustable Notch Filter all enable the BP8 to offer a stunningly versatile array of sounds.
The bass processor also features a myriad of studio-quality dedicated bass effects that DigiTech is famous for, including Auto Wah, Chorus, Delay, Detune, Flanger, Noise Gate, Phaser, Pitch Shift, Reverb, Tremolo and Wah, as well as an on-board continuous controller pedal to modify effect parameters in real-time. Add to this a rugged metal chassis, integral chromatic tuner and 40 user/40 factory presets, and the BP8 becomes the easiest way to expand a bassist's current rig.
The manufacturer's suggested U.S. list price on the BP8 is $449.95.
BP8 Paradigm features
Features of the BP8 Paradigm
• Groove tube 12AX7 tube and solid-state preamps
• Full-function compressor
• 4-band EQ
• Notch filter
• Stereo outs or mono bi-amp with built-in crossover
• Jam-a-long jack (CD or tape stereo input)
• Headphone output
• Built-in expression pedal
• Chromatic tuner
• S-DISC II expression pedal
• Effects include: band-passed modulation effects (chorus, flanger, phaser, and detune), autowah, wah, tremolo, octabass, fretless simulator, pitch shift, whammy, delay, reverb
• Input/Output Sections
• Input Connector: ¼ in. Unbalanced
• Input Impedance: 470k Ohms
• Nominal Input Level: -8dBu
• Maximum Input Level: +10dBu (before clipping)
• Output Connectors: ¼ in. TRS
• Nominal Output Level: +4dBu
• Maximum Output Level: +18dBu
• Output Impedance: 50 Ohms
• Frequency Response: 20Hz-16kHz ±0.5dB
• Signal to Noise Ratio: Greater than 95dB, ref=max. signal 22kHz measurement bandwidth
• THD: Less than 0.04% (1kHz)
• DSP Section
• A/D Converter: 20-bit, 128 x oversampled
• D/A Converter: 20-bit, 128 x oversampled
• Sampling Frequency: 39 kHz
• Architecture: Static-Dynamic Instruction Set Computer (S-DISC-II TM)
• Digital Signal Path Width: 24 bits (144.5dB)
• Internal Data Path Width: 48 bits (289dB)
• Dynamic Delay Memory: 256k x 24 bits (3.5 seconds)
• Static Delay Memory: 256 24-bit registers (6.55 milliseconds)
• Data/Address ALU Processing: 10.0 MIPS Data 15.0 MIPS Address
• Multiplier Size: 24 bits x 24 bits
• Other
• Factory: 40 programs
• User: 40 programs
• Power Requirements:
• External Power Supply (PS-0920)
• US and Canada: 120 VAC, 60Hz
• Japan: 100 VAC, 50/60Hz,
• Europe: 230 VAC, 50Hz,
• UK: 240 VAC, 50Hz
• Power Consumption: 16 watts
• Size: 2.75 in. H x 18 in. W x 8.75 in. D
• Net Weight: 11.10 lbs (5.05 kg)
