Feeler Aguilar OBP-3 Preamp

[D-Nut]

So this was installed in my SSII for about 15 minutes before I decided to go back to the MEC set up. I figured I'd hang on to it for a possible future project. Everything is tagged, I still have the box and I believe the wiring diagram is still there too. Plenty of slack, 18v system. I didn't take any pictures yet, but I can and will if people prefer.
I was hoping for $80 shipped. Let me know if you'd be interested.

[Halegroove]

Are the pots included and connected?

[D-Nut]

All prewired pots are included (and connected). There is a pan pot in the box as well which I am assuming is for pick up selection between two pick ups (THIS IS NOT CONNECTED).
There is only one 9v battery connector wired to the preamp with the leads for the other battery available for connection. Correction from my previous thread, this system can operate as a 9v, or an 18v. I do not know the difference between the output.
My tech did the honor of labeling everything, and the wiring diagram is included. Specific part number is
OBP-3TK/PP. I opted for the push/pull so that another hole didn't have to be drilled into my bass.
I need to make it clear that I DID NOT do the installation myself, I have no idea how wiring works nor do I care to learn. This was working 100% perfectly when it was taken out and it is buy at your own risk.

[D-Nut]

PM's answered.

[D-Nut]

payment pending.

[D-Nut]

SOLD! Thanks for playing.