Fender MIJ Jaguar Black BODY!!!!

[BassJunkie730]

OK so I'm going to unload this.

It's in good condition

The bass comes loaded with the preamp, hardware, and switches - NO BRIDGE


With a pair of Dimarzio Model J pickups with chrome pole pieces.

AND both a mint green and a BLACK pickguard.

AND the original pickups

All you need to do is buy a bound and blocked neck, tuners, and a 5 hole fender type bridge - and turn this body into a dream bass. I recommend an allparts maple bound and blocked neck because you NEVER see these basses with maple necks.

http://picasaweb.google.com/michaelhimes/JagBassBody#

$250 plus shipping gets it.

[Richard G]

pix??

[pbassnut]

A few questions for you ...

1) How much does it weigh?
2) Are the Dimarzio Model J pickups currently installed?
3) If so, was anything done to improve the sheilding when the new pickups were installed (these basses are reputed to be very noisy in their stock form due to inadequate shielding)?.
4) If so, are all the active controls (including the preamp bypass) still fully functional with the new pickups?
5) Will a stock Precision or Jazz neck bolt onto this body with no mods and function properly as is?

Thanks,

Steve

[Jo6Pak]

PIX!?!?!

[Richard G]

is it sold?..hit me up..

[BassJunkie730]

Pics are coming tomorrow morning. Sorry guys I've been super busy the last few days

I've replied to all pm's

Steve the body comes with the model j pickups installed. No additional shielding was needed because they are fully humbucking and operate with very low noise. the preamp and bypass switch are fully functional. this body will mate with any neck that accepts a standard fender neck pocket

I do not have a scale but with a neck it weighed a little of nine pounds

thank you for your inquiry

Michael

Originally Posted by pbassnut

A few questions for you ...

1) How much does it weigh?
2) Are the Dimarzio Model J pickups currently installed?
3) If so, was anything done to improve the sheilding when the new pickups were installed (these basses are reputed to be very noisy in their stock form due to inadequate shielding)?.
4) If so, are all the active controls (including the preamp bypass) still fully functional with the new pickups?
5) Will a stock Precision or Jazz neck bolt onto this body with no mods and function properly as is?

Thanks,

Steve

[Dolflundgren]

BRING TEH PICS.

[BassJunkie730]

Ok so under some scrutiny I found that - the body DOES have wear. a few tiny dings on the the front on the contour.

AND I cannot find the original bridge (pics have a hipshot vintage bridge that I need to complete another parts bass to sell)

HOWEVER - I do have the original pickups and I'm going to throw them in to make up for the lack of a bridge


I'm going to stick with the price though, as these NEVER show up parted out.

[joeyl]

wow, bump for a good guy! Wished I could buy this body but cannot since funds are tight.

[bassteban]

I-wish-I-could-afford-to-buy-this-and-slap-a-fretless-neck-on-it, just-because-you-NEVER-see-a-fretless-Jag-bump

[gnergaard]

Now THAT is a great idea.
Pm-ed
Mwwwah-ha-ha-ha-ha-ha!!!!!!

[D.Don]

Would that pocket fit an early 70's jazz neck?

D.Don

[gnergaard]

...I had the cash I'd be ALL over this.
Someone grab it.

[BassJunkie730]

ON HOLD

pending payment

[BassJunkie730]

No longer on Hold.

weighs in the 4.5 - 5lb territory unloaded.

Bump for price drop.

Let's get this guy sold.

$250 + shipping takes it home.

[Wafoleri]

interested in any trades?

[jpark]

I'll take it, pm coming your way

[etherealme]

This body still available?

[etherealme]

Hmmmm... No response, but your signature still advertises the link to this thread? What gives? Available? Thanks.

[irvinz]

its gone guys.