$250 plus shipping from Syracuse, NY 13210 ($20-$40 in the US) Will trade for anything (parts for my other projects, basses, necks) but in need of a cab. Will include cash if needed. Also have other basses fs/ft in my signature and a few accesories.
The project consists of a warmoth neck and an unknown precision body and a few parts.
The Precision body has a cool wax looking but hard natural finish. It includes the original white (3 ply wbw) pick guard. It looks like alder but I am not sure. A fender bridge and the original ground wire is included though not pictured. No issues with the body and very nice shape.
The warmoth neck with last 4 frets ripped out and epoxy filled. It's a maple neck and either pau ferro or rosewood fingerboard, with a nice satin finish. The truss rod works great and the frets are almost new. It has no issues other than the last 4 frets missing. It has the nut, but no tuners, and is in great shape.
In addition it will come with a neck plate and neck screws installed to keep the body and neck together... and a gigbag.
It's overall light to average weight. it will probably make for a 9 to 9.5 lb bass when complete. These 2 pieces are perfectly matched for each other so I am not seperating them.
I was going to complete this project myself but I just have too many so this one goes out the door.
All it really needs is the pickups, electronics, and tuners and some really minor hardware to be complete. It will be a nice project if you don't mind the last 4 frets missing or want to put a fretless ramp at the end. That's what I was going to do but don't have the tools to do it myself.
