Here is the loaded body from a parts bass I bought recently; I decided to keep the neck.
The wood is unknown, the brand is unknown. There are no brand marks on the bridge or pickups. The J pups are passive, and the wiring harness is passive V/V/T, and it all sounds pretty good; I think it is begging for a preamp though. The string spacing of the bridge is 16.5 mm, however the neck pocket will fit a neck that can take wider spacing at the bridge, so if you want wider spacing all you'd need is a different bridge. This bridge is quite nice quality though. Included are five recessed washers for the neck screws. There are various small scuffs and scratches, but no dents or chips in the "points". There are four extra holes in the back or side where the previous owner tried strap-button placements. The control cavity cover is homemade, and it has cracked around the screws and will need replacement. The body is very, very light! The whole bass when assembled and strung was only 7.25 lbs, and most of that was the neck!
All in all this is a great-looking and super lightweight Warlock body, fully loaded and ready for your project! $70 shipped. I will consider trades for pedals, TRS-TRS cables, ultralight tuners (Hipshot/Gotoh), electronic parts, onboard preamps, etc. Let me know if you have any questions.
Here is the thread where I previously was selling it as a complete bass:
FS: 5-string fretless Warlock! >>Blaaack Metaalll<
