FS: SX fretless Jazz neck with epoxied fingerboard
 

I defretted this SX Jazz neck and then coated it in epoxy. I radius sanded it smooth to 2400 grit and it plays really well - I'm just realizing that I'm not a fretless guy. I'd rather put a fretted neck back on the body this comes from. I installed a Hipshot string retainer and replaced the nut with a Tusq one.

Here are the dimensions:

Total length: 33 5/16"
Width of the neck at the nut: 1 5/8"
Width of the neck at the 12th fret: 2 1/4"
Thickness of the neck at the first fret: 7/8"
Thickness of the neck at the 12th fret: 15/16"
Radius: 14"
Neck pocket: 2 1/2" wide x 3/4" deep (not counting the fingerboard)
Pre-cut holes for tuners: 1/2" in diameter

I installed brass threaded inserts and will include the bolts on the off chance that they match up with your neck pocket holes.

$50 shipped, CONUS.

Cool Neck. Great Deal. Very Slick.

Thanks! It's going to be a great neck for someone out there.

TTT

You know one you SX guys wants this for a project bass!

Will this drop in a Fender body?

Sorry about that! I forgot to mention that this has been traded.