Gold Anno PBass Guard, Vintage Style Threaded Barrel bridge, Luthier special P Body

[4Mal]

Pic's soon

All prices are PLUS shipping @ actual

Pickguard is mint $25 shipped

Threaded Barrel Bridge is used but in great shape and fully functional, off a 62 RI originally. This is one of my favorite bridges. But I already have one for the shelf and don't need two! $20 includes screws. shipped

Fender "F" style neck plate $5 spoken for
The ah, luthier special is $25.

WD Music Tobacco burst over Alder with a flame maple cap. 1 filled hole on the back in the control cavity.

This is quite a nice P Body with a rather serious case of Mr Happy Router attack.

The neck pocket needs to be leveled and a shim created to raise the height of the pocket to the correct height - I was not paying attention and the weight of the router pulled down the template. The length and width are perfect so it's just the floor...

The original bridge mounting was off center about an eigth of an inch when I bought the body. I dowelled and filled those holes and redrilled so there is an extra set of now filled holes under the bridge.

This could be a really nice body but it's going to take 3 to 4 hours work for someone with the skills.

$25 or make offer...

Pic's soon I promise!

[4Mal]

body spoken for pending picture

[steamthief]

pm sent on "f" neckplate

[DTF]

ill take the pickguard

[tjh]

The threaded saddle bridge, and if still available the F neck plate can come to where it is still cold ... please and thank you

[4Mal]

Ok - pm's responded. I'll have pic's and shipping details to you guys later today. Be sure I have all your zip codes for the shipping.

Thx, Mal

[4Mal]

pic above is a little dark. 'Smear' above the neck pocket is residue form double stick tape that I used to hold the template during my ill fated routing ...

To make up for the dark pic above, the one below is a bit over exposed. So over all while the pic's independantly 'suck' - overall I'm in balance



Cntinuing my theme of bad photographing ...

[bobm2112]

I'll take the guard!!! :-)

[4Mal]

I was a little slow on getting the pic's up so Sonic Device get's a courtesy day on the pickguard.

Neck plate is still available.

[SonicDevice]

Originally Posted by 4Mal

I was a little slow on getting the pic's up so Sonic Device get's a courtesy day on the pickguard.

Neck plate is still available.

Greatly appreciated!

Looks like it's a 10 hole mount and unfortunately my new P requires 13.

Bumpin' it for the next gold digger in line =)

Thanks again 4Mal!

[4Mal]

body still available