Hipshot Bass Xtender BT4S Fender DLX Clover, Ultralites

[DopplerShift]

4 Hipshot Ultralites - $60 Shipped
Chrome/Satin, 1/2 Shaft

1 Bass Xtender BT4S - $60 Shipped
Very similar to BT4 except it has THICK clovers like those on fender deluxe basses, also has fender "F" stamp.
Chrome, 1/2 Shaft

Shipping to ConUS only

[CountBassy]

PM sent on the ultralites.

[CountBassy]

Please ignore the PM - I need 3/8", not the 1/2".

[RockBoxBass]

pm'd on the ultralites

[Quadzilla]

Correct me if I', wrong, but the 1/2" shaft ones are for old Fender necks (70's, etc) and the 3/8" version are for newer Fenders (late eighties through current)....right?

If these do indeed fit 70's Fenders, I'll take em!

[Marshbass]

Any chance of shipping the Bass Xtender BT4S to Australia?

[DopplerShift]

ConUS only,

TTT

[DopplerShift]

Originally Posted by Quadzilla

Correct me if I', wrong, but the 1/2" shaft ones are for old Fender necks (70's, etc) and the 3/8" version are for newer Fenders (late eighties through current)....right?

If these do indeed fit 70's Fenders, I'll take em!

After researching this a bit, these tuners fit on modern Fender headstocks. They were tested on a recent American Standard Jazz Bass. The bushings are 5/8" and they fit in there snuggly. I have 3 extra bushings that are slightly smaller at 19/32". I will include those with the sale as well. If you need this size Hipshot can provide you with the xtra 19/32" bushing.

I would like to make a little disclaimer. I can't be responsible if these don't fit your bass. All I can do is give you accurate measurements and you must determine if they fit. Measure the tuning machine holes, and if they're 5/8" these will work.

[DopplerShift]

Ultralites are SOLD

Closing this thread. The bass Xtender is still for sale in this thread...

http://www.talkbass.com/forum/showth...85#post6296785