Korg G5, EP1, CAE V-comp, Trilogic, Chandler Tube Driver and Noll TCM3

Bellbass · #1 05-05-2009, 01:34 PM

I've gotta a few items for sale. All are now unused due to the installation of an Eventide multieffect in my rack.

1) Pigtronix EP1 (phaser/envelope filter), with the Marvmod (you can use both effect simultaneously) and the up/down switch mode. Never been gigged, played a few rehearsal and put back in it's box. Comes with 12volts adaptor, the original box and manual. 150.00 +shipping

2) A Chandler Tube Driver rackmount, tube pre and overdrive. A friend gave it to me 20 years ago, I left it in a box and totally forgot about it. When I read the opinion of TB GearMaster Tom Bowlus about it, a few months ago, I decided to give it a try. Stayed no more two months plugged, total. But like so many I've seen, one yellow cap is missing on a button...

Comes with a stereo footswitch (on/off-boost), a 20' stereo cable, and a little switchbox : 1 stereo 1/4 to 2 mono 1/4 (needed to switch on the boost and/or bypass cause the two switches on the unit don’t seem to work. Should be a piece of cake for someone with some soldering iron skills – I don’t have any…). 130 +shipping

3) Korg G5 synth, used but in good condition (no original box but I downloaded the manual). A classic analog synth with 9 presets. 280$ + shipping

4) SOLD CAE V-Comp. Tube compressor, recommended by THE expert here on TB, Bongomania. 150$ +shipping

5) Xotic Trilogic preamp, 18v pedal preamp; selectable mid freq; passive and active inputs. Older model, battery powered only but with extensive battery life. 150$+ shipping. I had the project of adding an AC connector. I’ve got the 18 volt power adaptor (Dunlop) if interested in making the mod.

6) SOLD Noll onboard 3-band parametric EQ : Vol., Blend, and a three-band parametric. Each band control is a stacked pot with the boost/cut on top and the frequency sweep on the bottom (18V preamp). Bought it almost 3 years ago here on TB but it did not fit the bass it was meant for (an old – 1987 - Modulus TBX 5). It sits in a box since…See the details here
http://www.noll-electronic.de/sites_e/tcm_3p.html 120.00$ + shipping

Charles

Bellbass · #2 05-06-2009, 02:28 PM

Bump...

bongomania · #3 05-06-2009, 02:31 PM

Hey, is the CAE that unbranded prototype that I sold, or is it one with the CAE brand on it?

Bellbass · #4 05-06-2009, 09:12 PM

Hey Bongo! The comp is wrap up in a box since a year but, yeah, I'm pretty sure it's the unbranded prototype. I'll check that up tomorrow!

bongomania · #5 05-06-2009, 10:29 PM

Either way it's an awesome unit. I'm tempted to buy it back.

Bellbass · #6 05-07-2009, 08:24 AM

I know what you mean. I've been in doubt about selling it cause I know how great it sounds but...it's been a year in a box so that says a lot about my need regarding compression...

Dbass10 · #7 05-07-2009, 08:47 AM

Any chance of pics...specifically of the Chandler? Thanks!

Pitbull Growl · #8 05-08-2009, 10:27 AM

PM'd on the Noll (and a bump)

OrionManMatt · #9 05-08-2009, 11:07 AM

Yeah, pics on the Chandler and V-Comp would be great.

Bellbass · #10 05-08-2009, 01:02 PM

Noll on hold. Pics coming tonight!!

Bellbass · #11 05-08-2009, 05:32 PM

A pic of the Tube Driver and the little kit that comes with it. This is an old pic I had. If you need more, I'll have them done this week-emd. Could not get a pic of the Comp (camera problem...) I'll get a camera tomorrow...

Bellbass · #12 05-09-2009, 05:01 PM

Ok, the only inscriptions on the comp are: TC-1 Tube compressor. Maybe Bongo could tell us if it's the prototype he's referring to. I'll get pics tomorrow of that unit and of the other pedals.

bongomania · #13 05-09-2009, 05:34 PM

Yes, that's what was marked on mine, so I'd bet it's the same unit. I'd snap it back up except I have seriously overspent this week already. But if it's still here after my next paycheck, I may grab it.

Bellbass · #14 05-10-2009, 05:21 PM

Pics are taken but now I miss the "%&** cable to download them to my computer...Tomorrow, tomorrow.

As for the comp, it uses a 30W, 9v AC power adaptor (shipped with the unit). I don't know if the pedal could be powered by a power supply like the brick or a Voodoo Lab...

Bellbass · #15 05-11-2009, 06:26 PM

At last....Pics of the comp and the trilogic. Again, if more pics are needed, I'll take some more!
Noll is sold!

Charles

Bellbass · #16 05-11-2009, 06:32 PM

Pics of the EP1 and the G5...

newbold · #17 05-11-2009, 06:53 PM

is the G5 missing anything other than the box?

It's interesting me.

Bellbass · #18 05-11-2009, 07:42 PM

I don't have a power supply but it can be powered by any 9v standard power supply (DC 9V 400mA says the manual). I used to power it through my boss tuner (TU2). I've got the manual in PDF. It does sound good...but I had no use for it in the 8 years I've owned it so, it's time for it to get some playing time!

DeluxyMike5 · #19 05-12-2009, 01:17 AM

PM'd about the V-Comp!

Bellbass · #20 05-12-2009, 06:44 AM

And replied!