Mixer Rack Case

peterpalmieri · #1 10-20-2009, 08:52 AM

I am cleaning out the basement, this mixer rack case used to house a A&H Mix wizard. One of the latches broken, SKB sent me two latches so it is fixed and has an extra latch which I'll include. One of the retractable lifts does seem to stick and needs to be played with to get it to hold. The other side holds it upright no problem.

Its been sitting in the basement for a few years, make me a reasonable offer and it's yours...

bikeplate · #2 10-20-2009, 08:26 PM

Hi

I have a Yamaha OV1 Will it fit my mixer?

Rob

peterpalmieri · #3 10-20-2009, 08:58 PM

It will fit mixers up to 21" deep. I wasn't able to pull up specs on the OV1..

bikeplate · #4 10-20-2009, 08:59 PM

HI

Ill get some dimensions to u and we can try to figure it out

Rob

bikeplate · #5 10-20-2009, 09:36 PM

HI

OK, here goes. Just under 17" wide, just under 21" high The deepest part of the mixer is just under 6 inches. It tapers from just under 6 inches to much thinner. I guess as long as the fattest part fits when its latched, its all good.

I need to get rack ears for it. I used to have it loose in a flight case. Let me know

Rob

peterpalmieri · #6 10-21-2009, 05:20 AM

It looks like this case will only do 5 1/4 deep, doesn't sound like it's gonna work...

bikeplate · #7 10-21-2009, 11:44 AM

HI

OK. Thanx

Rob

peterpalmieri · #8 10-23-2009, 07:39 AM

It didn't work out with Rob so this is still available.

Noonan768 · #9 10-23-2009, 08:53 AM

peterpalmieri · #10 10-23-2009, 09:05 AM

replied!

fenderx55 · #11 10-23-2009, 01:45 PM

If this falls through I'd love to be next in line. I'll get dimensions tonight...

peterpalmieri · #12 10-24-2009, 10:35 AM