Fender Original Jazz pickup, USA. Neck position! I got it off ebay a long time ago, as-is, needing repair. I wanted to try my hand at pickup rewinding. I rewound it and it works, but it doesn't have enough wire on it. It reads 5.75K ohms resistance when it should read around 7.25. Buy it as-is, $15.00 shipped to CONUS.
Seven import style push-on knobs for Alpha and the like. The aluminum knob with the T for Tone looks pretty old. Two are similar to Gibson Speed knobs, and there are four P-bass type knobs (three chrome, one gold). $8.00 shipped CONUS
These are six vintage Daka-Ware Chicago knobs with set screws, as used on early Fender amps. Five of these knobs are simply marked "Daka-Ware Chicago" and probably date to the 1950's. The sixth says "Daka-Ware Chicago 8" and is probably newer than the others. Good shape, $15.00 shipped CONUS SOLD!!
Group of vintage bakelite knobs, for 1/4 inch solid shaft. The white ones (and the others the same size) are similar to what Fender used for a while in the early 60's, but smaller. There are a pair of dome knobs that are extra cool, and a red bakelite chickenhead. The large black one is a Daka-Ware, and that cris-cross one is an old radio knob. All of these are set-screw knobs and have their set screws. All 14 for $18 shipped CONUS
Two vintage fuse holders, one unused, the other used with what looks like a 1.5 amp fuse in it. $6.00 for both shipped CONUS.
Used but tested Alpha 500K audio taper push-pull pot, mini size, as sold by StewMac for 8.98 plus ship. Actually tests 415K. The splines are kind of chewed up but a knob will still go on it. Two nuts and a flat washer (I don't have a lock washer for it). $4.50 shipped CONUS
Shaft diameter 6mm split shaft, coarse knurling
M7 x 0.75
Threaded portion height
Required mounting hole diameter
Required body cavity depth
Three vintage Badass (or Badass II) saddle intonation screws, gold. These date to about 1979 and came off an S.D. Curlee bass that came with the BA bridge. How about $6.00 for the trio, shipped CONUS