So in my clear out of completed projects, I decided to take a hatchet to my parts bin (actually, closet) and move out some of the projects farthest back on the list. I have little info on the bodies listed here, and so they are going cheap! Maybe you know what it is, don't tell me, just take it off my hands so that I can find the end of my line of projects I have going again!
Fretless Johnson "Jazz" Neck *SOLD!*
Johnson "Jazz" neck which seems more like a P neck to me, though it isn't all that chunky. This neck has been refinished in black lacquer, but it has taken a little bit of a beating. It's also been defretted, stained a darker shade, and epoxied. It's not the prettiest job but it is functional and good if you want a beater fretless neck to mess with, and it should fit on Fender style bodies. Truss rod works fine. The board is smooth with no noticeable bumps, and a satin-ish finish because I didn't want it to be super glossy. Needs a new nut.
$15 + shipping to ConUS
---------------------------
Alvarez 5 String neck *SOLD!*
This neck I don't know much about because I got it in a trade with some other stuff and I don't really mess with 5 strings. It's got some sticker residue and stuff on it and no nut, but it seems otherwise solid and has the serial number stuff on the back of the headstock.
$15 + shipping to ConUS
---------------------------
Unknown Double P Bass Body *SOLD!*
No idea about this body besides that it has a double P bass configuration and that it is solid wood. I stripped the front and back sides already. The edges will still need to be stripped before refinishing.
$20 + shipping to ConUS
---------------------------
Unknown Red P Bass Body *SOLD!*
Another unknown generic P bass body. I don't know what brand it is, it's close to Fender dimensions. I started stripping the finish on this one also, but it has a ways to go and I have too many projects to work up the motivation to do it.
$15 + shipping to ConUS
----------------------------
Unknown Rear Routed P/J Bass Body *SOLD!*
Not sure on the origins of this one either, but it's one I like just because it's rear-routed. It could be a Squier II but it's likely something from that era of the 80s.
$20 + shipping to ConUS
---------------------------------
Palmer/Hondo Maple/Maple Bass Neck *Available*
I bought this before I decided to use the original neck for a previous project, so now here it is. Headstock is painted green. The tuner holes in the back are a little messy but would be covered by most any tuners you put on it. Profile feels a lot more like a jazz neck than a P neck. Needs a new nut.
$20 + shipping to ConUS
----------------------------
Unknown Black P Body *SOLD!*
Another generic laminated P body that I'm not sure where it came from, much like everything on this page! I cleaned a ton of sticker residue off this thing. It's decently beat up but with hardware and a pickguard put on it would probably look pretty decent.
$15 + shipping to ConUS
