USA Fender P pickup and S1 wiring harness, and vintage capacitors = cool stuff

[Busker]

This is the complete pickup and wiring harness (minus bridge ground wire, which I will add if desired) out of my 2006 American Series P bass, with the S1 switching system. Has the correct knobs. Original American Series pickup. I did at one time have a Dimarzio pickup wired in, but I reinstalled the USA Fender pup. All 100% working condition. $65 shipped First Class CONUS

Someone wanted the harness (pots, knobs, etc) but did not want the pickup, so I sold the harness less pickup. Pickup has sold as well. Thank you!

[Busker]

The wiring harness has sold seperately. Thanks! Pickup might still be available by itself.

[berman3313]

Give me a shout on the pickups!

Originally Posted by Busker

This is the complete pickup and wiring harness (minus bridge ground wire, which I will add if desired) out of my 2006 American Series P bass, with the S1 switching system. Has the correct knobs. Original American Series pickup. I did at one time have a Dimarzio pickup wired in, but I reinstalled the USA Fender pup. All 100% working condition. $65 shipped First Class CONUS

Someone wanted the harness (pots, knobs, etc) but did not want the pickup, so I sold the harness less pickup.






These are vintage NOS caps, Cornell Dubilier .1 MFD 400 V.D.C, +/- 10%. These are 1 1/2 inches long by 1/2 inch diameter. Might be a tight squeeze for use in some guitars. I was told these are paper caps, but they are sealed in a plastic-type shell. I have more than four of these, buy as many as you want, but please buy at least two. $8.00 per pair shipped First Class CONUS

Next are some NOS Sprague orange drop .033 MFD 400V caps, +/- 5%, which would be in between .02 and .047, the common values for guitar and bass respectively. Might sound most excellent for bass, haven't tried them as yet. I only have four of these. Please buy at least two. $8.00 per pair shipped First Class CONUS