It has been a bit over a year since I was active on this site and I had forgotten about this piece which was long ago stowed away in a box. There was a buyer once upon a time who was very interested and then disappeared out of nowhere. I suppose I thought it would never sell, but alas I still have it, and I still don't use it.
Don't know why I did not originally post this but one of the switches on the foot controller is broken. Ideally, someone who can fix it themselves would buy this and it would be incredibly easy to solder in a new switch. This does not affect the other switches at all and the rest of both parts of the unit work perfectly. I think that 250 shipped is still a fair price for the unit even with the one broken switch seeing as the unit has only been owned by me, was gigged with once or twice, and originally cost me over double what I am offering it for now.
I will post pictures here shortly of the unit. Thanks for looking.
Note: The bottom of the broken switch (#2) is still inside the controller soldered onto its connecting cables.
These switches control which loops on the patchbay are activated by each footswitch
These switches are on the other side and control whether or not footswitches can be activated at the same time. If the switch's are all set one way, then only one footswitch can be active at a time, and hitting one will disengage whichever one is currently active. Which all of these switches the other way, you can have all 8 footswitches engaged at the same time. You can use these switches to have some of the foot controls turn on one effect at a time so you can add them together, while other foot controls turn on a certain combination of patchbay loops simultaneously and disengage any other active footswitch.
hook side velcro, will remove if you like.
patchbay
More patchbay. The one labeled "CH" on top is used to setup footswitch number 4 as a channel switcher for an amp. The two IN and OUT sections can be used in myriad different ways, but the simplest way would be that you plug your bass into the IN of section A and then plug the OUT of section B into your amp. The OUT of section A comes after the first four loops on the patchbay. You can use this to have 4 different loops or effects go into the effect loop on your amp, back into the IN section of B where you could then have 4 more effects which would be running directly into the amp instead of the effects loop via the OUT of section B. It is also possible to use this functionality to make the unit into an A/B/Y box for switching between two amps. There are many other things you could do with this.
rackmountable
The whole set
