DBX Driverack PX new, in box w/ RTA mic

4Mal · #1 06-22-2012, 11:20 AM

Waited too long to return. Recently retooled my PA and this is now extraneous.

This is the model that has powered speaker presets. Works fine with a power amp and passive speakers as well but DBX wants you to buy the upper end unit so they don't market it that way.

Crossover, RTA room flattening, Feedback suppression, Comp/limiter on the mains are the high points.

399 new. Save a hun!

299 shipped conus from me. Paypal OK. New in box with all goodies including the RTA mic.

Might consider some trades... No pedals thanks. Decent mic's, maybe a flippable bass or guitar (PRS SE, MIM P, J, Tele, Strat, etc) without issues, maybe a lightweight power amp.

Rhomco · #2 06-25-2012, 06:03 AM

For a good guy and a great deal on a Drive Rack.
Rob

4Mal · #3 06-27-2012, 10:01 AM

Thanks Rob!

4Mal · #4 06-29-2012, 08:05 AM

back to page uno

4Mal · #5 07-10-2012, 10:51 AM

Sojourner · #6 07-10-2012, 01:01 PM

Great little piece of kit. Agreed on them marketing it in such a way that you'll think you need the higher priced model. The only real difference is this only has left, right and stereo subwoofer outputs rather than multiple outputs for your mains. You'd only need something like that if you were running delayed stacks in a different part of the room from your main stacks. Got this one and it works great for me, powered speakers or amp/speaker combinations.

4Mal · #7 07-10-2012, 01:46 PM

Thanks. I did a lot of research before deciding to go with this - then after some more went StudioLive and QSC K-series... If Presonus hadn't included the SMAART RTA setup in the control software for the Studio Live boards, I would have implemented this ...

Sojourner · #8 07-10-2012, 01:59 PM

That's actually what I use mine with. Bought my StudioLive before the SMAART stuff was included. I used it with the SL 16.0.4, a pair of QSC K10's and the KSUB. Works great. Also used the whole kit minus the speakers to run a system with a pair of dual 15 Yorkvilles and a pair of Yorkville LS800P subs. Best that room has ever sounded (and still to this day). Gymnasium style room with concrete floors, metal roof with insulation and four flat walls...probably 50' wide and nearly 80' deep.

4Mal · #9 07-10-2012, 02:52 PM

Pretty much my setup. K10's on Ksub, Mackie Thump 12's as monitors driven off a 16.4.2. Just getting into the laptop and iPad integration using a Lenovo T61 and Netgear router. Installed a new 500g 7200 rpm drive and a new install of Win 7. Followed The Presonus Guide to optimizing Windows for audio processing. Got that done Sunday and then installed the new 1.6 VSL software Andy flashed the board. Tonight I get to test the integration And play with SMAART.

I do a lot of acoustic music and the instruments and voices just shine through. I'm beginning to resent some of the small places I play where I have to fall back on an old Mackie 406 and 1 speaker due to size and volume constraints... I'm still willing to bank those gigs though...